Using The Headphones; Video Select - Pioneer VSA-AX10I-S Operating Instructions Manual

Using the Headphones

The headphone feature is explained here.
1
Phones jack

Video Select

This function allows you to listen to one sound source while you watch a different video source on your TV. The
sound source is set in the normal fashion as is explained on p.50 & 51. You then alter the video input with the
VIDEO SELECT button.
1
VIDEO SELECT
Amplifier
BASS/
TONE
TREBLE
DISPLAY VIDEO
DIMMER SELECT
SPEAKER
STATUS
LOUDNESS
A/B
SYSTEM
SETUP MONITOR
1 Plug headphones into the Phones
1 Use the VIDEO SELECT button on the
MAIN SUB
EFFECT/
CH SEL.
1
INPUT
ATT.
TAPE 2
SIGNAL
SELECT
jack on the front of the amplifier.
No sound will be audible from the speakers when
headphones are plugged in.
• All listening modes will be downmixed to 2 chan-
memo
nels.
• If you're listening to a 2 channel source there will
be no matrix decoding (i.e. you will not be able to
get surround sound decoding).
• If your U-shaped connectors (see p.34) aren't in
place you won't be able to use headphones.
• SPEAKER SYSTEMS (p.41), SPEAKER DISTANCE
(p.45) and Acoustic Calibration EQ (p.46) settings
have no effect on playback through headphones.
AMPLIFIER'S sub screen or the front
panel to cycle through the different
possible video inputs.
The first press shows the video input you are currently
using. After that pressing VIDEO SELECT cycles though
the possibilities in the following order:
DVD/LD TV
OFF
VCR 3
The OFF setting means you are listening without a
video signal.
After choosing a video input the display on the amplifier
will show that input for about 5 seconds and then
revert to showing the listening mode the amplifier is in.
• The VIDEO SELECT remains set to the input you
memo
chose until you change the audio input.
• If you change audio functions the amplifier will
reset itself to make the video and audio inputs
correspond.
Also, if you switch the power of the amplifier off
when you turn it back on the video and audio in-
puts will reset so that they correspond.
Basic Operation
VIDEO
SAT
VCR 2 VCR 1/DVR
63
En