Data Copy Of Acoustic Calibration Eq - Pioneer VSA-AX10I-S Operating Instructions Manual

Setting Up for Surround Sound

Data Copy of Acoustic Calibration EQ

We recommend that after you have completed AUTO SURROUND SETUP (p.14) or adjusted Acoustic
Calibration EQ using the AUTO mode (p.45), copy those settings from either ALL CH ADJ or F ALIGN and adjust
CUSTOM1 or CUSTOM2 manually. You can also copy settings between CUSTOM1 and CUSTOM2.
• The way to copy settings is shown below. To adjust them, see Acoustic Calibration EQ on page 46.
If starting fresh, complete steps 1-4 in Setting Up for Surround Sound (see p.40) first.
1
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Level ]
[ 3.Speaker Distance]
[ 4.Acoustic Cal EQ
[Return]
2
2.4. Acoustic Cal EQ
Manual
[Data
[CUSTOM1]
[CUSTOM2]
Auto
[ALL ADJ & FRONT ALIGN]
[Return]
Your Speaker Systems
" Normal Surround "
3
2.4. Acoustic Cal EQ
A.Cal EQ Data Copy
CUSTOM1
CUSTOM2
[Copy OK]
[Cancel]
48
En
]
Copy]
←
To From
[CUSTOM1 ]
[CUSTOM2 ]
1 ACOUSTIC CAL EQ should be
selected. If it isn't use the 5∞
buttons to select and press ENTER.
You should get the first Acoustic Calibration screen
on your TV.
2 Use the 5∞ buttons to select DATA
COPY and press ENTER.
3 Use the 5∞ buttons to select to copy
to CUSTOM1 or CUSTOM2 and 2 3
buttons to select a source for the
copy.
The possible sources are:
CUSTOM1 – F ALIGN – ALL ADJ – CUSTOM2
4 To copy the settings use the 5∞
buttons to select COPY OK and press
ENTER and continue with step 6.
5 To cancel the copy use the 5∞
buttons to select CANCEL and press
ENTER.
6 You are in the first Acoustic
Calibration EQ screen now. To
manually adjust settings go to
Acoustic Calibration EQ, step 2
(P.45).
7 To leave DATA COPY mode, use the
5∞ buttons to select RETURN and
press ENTER.
You will return to the SURROUND SETUP menu. Select
EXIT and press ENTER to exit the setup process.