Care And Maintenance Instructions; Fouling By Copying Or Sending Fax Messages; Fouling By Received Fax Messages - Philips Fax Machine User Manaul

Care and maintenance instructions

The scanner glass and rollers of your fax machine should be cleaned of paper dust and scuff when necessary.
Before opening the fax machine, make sure that you are electrically discharged by e.g.
touching the metal housing of a grounded appliance, a water pipe or radiator.
Use a soft, fluff-free cloth lightly moistened with a little alcohol (96%). You can also use
a special cloth for cleaning fax machines, which is available on the market. Do not allow
any moisture to penetrate inside the device.

Fouling by copying or sending fax messages

Clean the scanner glass, scanner roller, document feed roller and facing rubber lips
Open the operation panel by raising it at the recess in
the middle. If you hear a slight click, the panel is latched
into place.
Hold down the FINE/PHOTO key on the operation panel: the scanner
roller (C) will begin to turn. You can then clean the scanner roller
FINE/PHOTO
evenly by lightly rubbing the cloth over it.

Fouling by received fax messages

Clean printer roller
1
If the paper feed mechanism contains paper please
remove it.
1. Open the operation panel as described above (1).
2. Then open the ink film cover by pressing both
blue release levers back at the same time with both
hands and then folding back the ink film cover (2).
Do not use the fax cleaners available on the market which are drawn through the
machine automatically. By doing so you can damage your fax machine!
Lightly wipe the scanner glass (B) and rubber lip (D) with a
cloth. Carefully turn the document feed roller (A) by hand and
wipe it gently with the cloth.
2
1
– 53 –
A
B
C
D
E
Using a cloth as described above, wipe the grey printer
roller (E). To clean the entire roller turn the roller by hand.
When cleaning is complete, close the ink film cover and
the operation panel.