Table of Contents
Advertisement
DAY mode
In DAY mode you can set how your fax machine should respond when it receives a fax. For units with built-in answering
device, this can be switched on and off using this function.
In TIMER mode your fax machine automatically switches from DAY mode to NIGHT mode and vice
versa. If you only want to use your fax machine in DAY mode (TIMER mode deactivated) press the
DAY/NIGHT/TIMER key for at least 2 seconds until you hear a confirmation tone and the TIMER
pointer disappears.
The following options are available for fax reception:
FAX RECEPTION MODE
FAX: NORMAL: If you answer a call on your fax machine or an additional device and you recognise that it is a fax call you
will have to start fax reception manually (see FAX: MANUAL).
SERIAL CONFIGURATION
Faxes are received automatically after ringing
at least once.
For phone calls, your fax machine acts as a
normal telephone and starts to ring
immediately.
Other telephones ring as often as your fax
machine.
Advantages: faxes are received after only a
few rings.
Faxes are received automatically but only after
several signals.
For phone calls, your fax machine acts as a
normal telephone and starts to ring
immediately.
Other telephones ring as often as your fax
machine.
Advantages: the caller only pays call charges
when you answer the phone or fax reception
begins.
On receiving a fax, your fax machine acts as a
normal telephone. If you lift the handset and
recognise that the caller is trying to send a fax
(tone or silence) press the START key and
replace the handset after 2 seconds. Fax
reception starts.
For phone calls, your fax machine acts as a
normal telephone and starts to ring
immediately.
Other telephones ring simultaneously with
your fax machine. You can start fax reception
∗
by pressing the keys
and
telephone. This mode only works if your
telephone sends tone dialling signals.
Advantages: You have the option of receiving
faxes on your computer or another device (the
built-in fax switch is switched off).
Here you can enter your personal settings.
See chapter 8 Additional functions/Fax reception: EXPERT.
– 22 –
PARALLEL CONFIGURATION
Faxes are received automatically after ringing
at least once.
For phone calls, your fax machine acts as a
normal telephone and starts to ring
immediately.
Other telephones ring at least once.
Faxes are received automatically after a few
ringing signals.
For phone calls, your fax machine acts as a
normal telephone and starts to ring
immediately.
Other telephones ring until the built-in
answering device is activated or fax reception
is started.
Advantages: you have about 5 rings during
which to pick up the handset of your fax
machine or other devices.
In fax reception, your fax machine acts as a
normal telephone. If you lift the handset and
recognise that the call is a fax call (tone or
silence) press the START key and wait for 2
seconds. Then replace the handset. Fax
reception starts.
For phone calls, your fax machine acts as a
normal telephone and starts to ring
immediately.
Other telephones ring both for fax and
telephone calls. You can start fax reception by
5
on the other
pressing the keys
telephone. This mode only works if your
telephone sends tone dialling signals.
Advantages: You have the option of receiving
faxes on your computer or other device (the
built-in fax switch is switched off).
∗
5
and
on the other
Advertisement
Table of Contents
