Table of Contents
Advertisement
4 Carefully remove the document either from the front
or the back.
5 Close the scanner cover on the left and right, making
sure it clicks into place.
6 Close the panel so that it also clicks into place.
7 Insert paper (see Installation / Loading paper).
Service code
Function 45 Service code is used to delete some or all of
the settings you have changed on the fax machine since it
was supplied from the factory. Th is function enables you
to partially or fully reconfi gure your device. It is especially
helpful if you have modifi ed settings but fi nd that your
fax machine does not respond as expected.
v Only use this function when absolutely neces-
sary!
If you are satisfi ed with your changes to the factory set-
tings you should not use this function.
After deleting some or all of your custom settings please
rerun Easy Install.
Th e following codes are at your disposal:
User Manual
Code No. 7117
Th is code erases all your modifi cations to the factory set-
tings. Th e fax machine will therefore react in exactly the
same way as on fi rst installation.
Code No. 7140
Th is code deletes all the settings and data you have en-
tered on your fax machine with the exception of the fol-
lowing:
•
received fax messages
•
stored SMS messages
•
stored telephone book numbers
•
your name
•
your telephone number
Example for using a service code:
1 Select function 45 by pressing MENU, 45 and
OK on the fax machine. Enter the service code (7117
or 7140). Press OK.
2 With u you can select whether you really want
to delete your settings. Confi rm with OK. Your fax
machine will be reset to its original confi guration.
Care
Before opening the fax machine, make sure that you are
electrically discharged by e. g. touching the metal hous-
ing of a grounded appliance, a water pipe or radiator.
Use a soft, fl uff -free cloth. You can also use a special cloth
for cleaning fax machines (see Delivery Service). Never
use liquid or gaseous cleaning agents (sprays, scouring
agents, polishes etc.). Do not allow any moisture to pen-
etrate inside the device.
Clean the scanner glass
1 Open the paper feed fl ap and carefully pull out the
paper. Close the fl ap again.
47
Advertisement
Table of Contents
