Table of Contents
Advertisement
If you did not receive the ID information the display will show:
(this occurs if e.g. the caller has an unlisted telephone number)
Using the CURSOR LEFT/CURSOR RIGHT key you can now step
through the entries.
Press STOP to return to stand-by mode.
STOP
Dialling a telephone number from the call list
The telephone numbers of the last 10 received calls are stored.
Press the REDIAL key for at least 2 seconds until you hear a
confirmation tone. The latest entry in your caller's list appears on the
display.
Press the CURSOR LEFT/CURSOR RIGHT key repeatedly until the
desired entry is shown on the display.
Lift the handset. Your fax machine will automatically dial the last entry
shown.
If you receive more than ten calls, the first entry will automatically be deleted from the call list. If there was more than one
call from the same number, only the last call is stored in the list.
Deleting entries from the Redial or calling line identification memory
You can delete an entry while searching through your Redial or Caller ID memory.
Press the CURSOR LEFT key for at least 2 seconds.
With the CURSOR LEFT/CURSOR RIGHT key you can now choose
whether you wish to delete one entry or all entries.
OK
Confirm with OK. The display shows for 2 seconds:
FUNCTION
Short dial
There are short dialling keys available which you can use to store numbers you dial frequently.
Storing a short dial number with name
Press the SHORT DIAL key for at least 2 seconds until you hear a
1 - 9
confirmation tone.
1
2
3
4
5
6
Choose a number from 0 - 9.
7
8
9
∗
0
#
1
2
3
4
5
6
Enter a name.
7
8
9
∗
0
#
– 27 –
Advertisement
Table of Contents
