Adjusting The Recording Time - Philips Fax Machine User Manaul

Philips fax machine

Hide thumbs Also See for Fax Machine:

Overview (44 pages)

User manual (44 pages)

Manual (36 pages)

Table Of Contents

Table of Contents

Press the RECORD key again.

RECORD

Wait until you hear the confirmation tone. Now start to record your

message. Position yourself about 20 cm from the fax machine. Speak

slowly and clearly and avoid long gaps in the message. A black bar

will move across the display to indicate how much memory is

available for the outgoing message. When it has moved right across

the display, the device will switch itself off, in which case you can omit

the next step.

Stop recording by pressing the RECORD key or the STOP key.

RECORD

STOP

If you want to record only the first outgoing message, press the

Press the RECORD key again. Wait until you hear the confirmation

tone. Now start recording your closing message. The black bar will

RECORD

again indicate how much memory is available.

Stop recording by pressing the RECORD or the STOP key. You do not

need to do this if the device has switched itself off automatically.

RECORD

STOP

After a short time the two outgoing messages will be played back

automatically. You can adjust the volume with the keys CURSOR

LEFT and CURSOR RIGHT (see chapter 3 Basic functions/Volume

of the loudspeaker). The duration of each message is shown on the

display, e.g.:

If you want to play back previously recorded outgoing messages, press the RECORD key only once.

If you wish to record the outgoing messages again, repeat the entire procedure.

RECORD

If you only wish to re-record the final announcement, press the RECORD key once for at least 2

seconds and then press the key

by pressing the RECORD key. To end the recording press the STOP key.