Remote Access - Philips Fax Machine Manual

You can also control the answering machine functions on your fax from
any telephone using tone dialling.
Before you can use remote control you have to enter an access
code in function 52 (this code will also be used for function 55
Forwarding).
Select function 52 and press OK.
Enter a four digit code.
Press OK. The code is now stored.
If you want to listen to the messages recorded from another
telephone, call your fax machine and wait for the answering
machine to play the message.
Enter the four-digit code. The outgoing message will be inter-
rupted. The new messages will be recorded. If no new messages
have been recorded, you will hear a second confirmation tone.
Then you can enter commands as usual or terminate the remote
control by replacing the handset.
FUNCTIONS
Repeat current message
1
Play
2
Skip forward
3
Record outgoing messages
4
Play outgoing message
5
STOP
8
Delete message:
6
Current message
ee
Press
6
e
Press , deleted
6
All messages
ee
Press
6
Press , deleted
e
6
DAY-Mode:
7
Press e , (DAY-Mode activated)
7
NIGHT-Mode:
9
Press , (NIGHT-Mode activated))
e
9
1 The message you are just listening to will be repeated.
2 Your messages will be played back.
3 Move to the next message.
4 Record a new outgoing message. If you press 4 again after two
confirmation tones, you will hear a long confirmation tone. Record
the new outgoing message and finish with 4.
5 The current outgoing message will be replayed.
6 The current message will be deleted. If you press 6 after having
listened to all messages, all messages will be deleted. In both cases
you will hear a confirmation tone after the first time you press the
key. Press 6 again within five seconds to execute the deleting
command.
7 Activate S.
8 The current command will be interrupted.
9 Activate M.

Remote access:

Enter telephone number
Wait for outgoing message
Enter access code
e
Listen to new
ee
messages
e
Enter function
$
1 2 3
4 5 6
7 8 9
0
X X X X
1 2 3
4 5 6
7 8 9
0