Listening To Messages; Deleting Messages; Setting Up Forwarding And Remote Access - Philips MAGIC 5 eco User Manual

4 Use [ to select whether you would like the outgoing
message to be switched on/off without recording the
message.
5 Confirm with OK.
Notice
EN
Overwriting Existing Outgoing Mes-
sage
When you record an outgoing message, you
are asked, if you would like to use the old
outgoing message or would like to record a
new one. Confirm with OK.
6 Recording a New Outgoing Message: Press OK
to record an outgoing message. Wait for the confirma-
tion tone before you say your text.
Notice
Length of Outgoing Message
The outgoing message must be longer than
ten seconds.
7 Press OK to end the recording. The recording is played
back.

Listening to Messages

Listening to Messages
Notice
Listening to Messages
Press # to play the next message. With the
number keys, you can load the desired message
directly. During playback, press C and OK in
order to delete the currently playing outgoing
message. Using [, set the volume. Stop the
playback with STOP.
Listening to New Messages
Indication of New Messages
If new messages have been received on the answering
machine, the ä key blinks. The number of the new
messages is shown on the display.
1 Press ä.
2 Confirm with OK.
3 The new messages are played back.
Playing Messages again
1 Press b.
2 Using [ select MESSAGES .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 72 and OK.
4 Using [ select MESSAGE: PLAY .
5 Confirm with OK. The messages are played back.
16

Deleting Messages

Deleting Individual Message
During playback, press C and OK in order to delete the
currently playing outgoing message.
Deleting Messages already Played
Deleting New Messages
Notice
Deleting New Messages
Messages not yet heard must be heard first
before deleting them.
1 Press b.
2 Using [ select MESSAGES .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 72 and OK.
4 Using [ select MESSAGE: DELETE .
5 Confirm with OK. The heard messages are deleted.
Notice
Deleting Heard Messages
You can also delete the already heard mes-
sages by pressing C and OK in the starting
mode.
Setting up Forwarding and
Remote Access
Entering Access Code
Access Code
You must enter an access code to be able to receive trans-
ferred messages, or listen to and control your answering
machine from other telephones.
Remote Control On/Off
Notice
Remote Control On/Off
The remote control is switched off with the fac-
tory-installed access code ( 0000 ). Change the
access code to switch on the remote control. If
you want to switch the remote control off enter
the factory-installed code 0000 again.
1 Press b.
2 Using [ select ACCESS CODE .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 79 and OK.
Philips · PPF 675