Handset Programming Using The Base Unit Pin - Panasonic KX-FC195E Operating Instructions Manual

7. Programmable Features
8. Press {e} or {v} repeatedly to select the
desired setting.
"ON": You can answer a call by just lifting the
handset off the base unit without pressing
{C}.
"OFF" (default): Deactivates this feature.
9. Press {>} or {j}.
10. Press {ih}.
Setting the battery type
1. Press {j}.
2. Press {e} or {v} repeatedly to display
"SETTING HS".
3. Press {>}.
4. Press {e} or {v} repeatedly to display
"OTHER OPT".
5. Press {>}.
6. Press {e} or {v} repeatedly to display
"BATTERY TYPE".
7. Press {>}.
8. Press {e} or {v} repeatedly to select the
desired setting.
"NI-MH" (default): Nickel metal hydride
batteries are used.
"NI-CD": Nickel cadmium batteries are used.
9. Press {>} or {j}.
10. Press {ih}.
Resetting the handset settings to their
default settings
The handset can be reset to the following default
settings.
Feature
Time alarm mode
Alarm time
Ringer volume
External ringer
pattern
Internal ringer
pattern
Paging tone pattern
Alarm tone pattern
Key tone
Call waiting tone
Range warning
alarm
Battery low alarm
58
Default setting
"OFF"
Clear
High
"1"
"1"
"1"
"1"
"ON"
"ON"
"OFF"
"ON"
Feature
Standby mode
display
Talk mode display
Display language
Call BAR mode
Direct call mode
Direct call number
Handset PIN
Auto talk
Base unit access
(page 62)
Redial memory
Receiver volume
1. Press {ih}.
2. Press {j}.
3. Press {v}.
4. Press {>}.
5. Press {e}.
6. Press {>}.
7. Enter the 4-digit handset PIN.
L The default PIN is "0000".
8. Press {e}.
9. Press {>} or {j}.
10. Press {ih}.
Note:
L Battery type selection (page 58) will not be
reset.
L The phonebook data (page 29) will be saved.
7.5 Handset programming
using the base unit PIN
{>}{e}{v}
To exit programming, press {ih} any time.
Default setting
"CLOCK"
"TALK TIME"
"ENGLISH"
"OFF"
"OFF"
Clear
"0000"
"OFF"
"AUTO"
All clear
Medium
{j}
{ih}
{C}