Table of Contents
Advertisement
2. Preparation
Example: 10 August, 2003
Press {1}{0} {0}{8} {0}{3}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
2. Press {*} repeatedly to display "PM".
6
Press {SET}.
L The next feature will be displayed.
7
Press {MENU} to exit the program.
Note:
L This information will be printed on each page
transmitted from your unit.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
24 hour clock entry
If you select the clock display to "24H" (feature
#19, page 51), enter the clock in step 5 as
follows:
Example: 15:15 (3:15PM)
Press {1}{5}{1}{5}.
24
D:10/M:08/Y:03
|
TIME:
1 2:00AM
D:|
1 0/M:08/Y:03
TIME: 03:15AM
D:|
1 0/M:08/Y:03
TIME: 03:15PM
2.7 Your logo
The logo can be your company, division or name.
{<}{>}{A}{B}
{MUTE}
{RECALL}
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display the
following.
3
Press {SET}.
L Cursor (|) will appear on the display.
4
Enter your logo, up to 30 characters. See the
character table on page 25 for details.
5
Press {SET}.
L The next feature will be displayed.
6
Press {MENU} to exit the program.
Note:
L This information will be printed on each page
transmitted from your unit.
To enter your logo
Example: "BILL"
1. Press {2} 2 times.
2. Press {4} 3 times.
{STOP}
{SET}
{MENU}
SYSTEM SET UP
PRESS NAVI.[( )]
YOUR LOGO
PRESS SET
LOGO=|
LOGO=|
B
LOGO=B|
I
Advertisement
Table of Contents
