Table of Contents
Advertisement
7. Programmable Features
Features (Base Unit)
7 Programmable Features
7.1 Base unit
programming
{<}{>}{
7.1.1 Programming basic
features
1
Press {MENU}.
2
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press {MENU}.
7.1.2 Programming advanced
features
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
"ADVANCED MODE".
3
Press {SET}.
4
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
50
{SET}
A
}{
B
}
{MENU}
6
Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7
To exit programming, press {MENU}.
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number
(page 50 to page 54).
3. Press {A} or {B} repeatedly to display the
desired setting.
4. Press {SET}.
5. To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit the program.
7.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 23 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 24 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 26 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR
[±]
To print a sending report for fax transmission
results (page 36).
"ERROR" (default): A sending report will be
printed only when fax transmission fails.
"ON": A sending report will be printed out after
every transmission.
"OFF": Sending reports will not be printed out.
Advertisement
Table of Contents
