Selecting The Ringer Mode - Panasonic KX-FC195E Operating Instructions Manual

8. Options
4
Press {7}.
5
Enter the 4-digit base unit PIN.
L The default PIN is "0000".
6
Press the desired handset number.
L The selected handset number will flash.
7
Press {>} or {j}.
8
After "SETTING BS" is displayed, press
{ih}.
8.2.2 Cancelling a base unit
You can cancel any base unit that your handset
is registered to.
1
Press {j}.
2
Press {e} or {v} repeatedly to display
"SETTING HS".
3
Press {>}.
4
Press {e} or {v} repeatedly to display
"REGISTRATION".
5
Press {>}.
6
Press {e} or {v} repeatedly to display
"CANCEL BS".
7
Press {>}.
8
Enter the 4-digit handset PIN.
L The default PIN is "0000".
9
Press {e} or {v} repeatedly to select the
desired base unit number.
10
Press {>}.
L The selected base unit number will flash.
11
Press {>}.
12
Press {e} or {v} repeatedly to select
"YES".
L To stop cancelling, select "NO".
13
Press {>} or {j}.
14
Press {ih}.
8.2.3 Selecting a base unit
When "AUTO" (automatic base unit access) is
selected, if you move outside of the radio range
of the current base unit, the handset
automatically searches for other registered base
units.
When a specified base unit is selected, the
handset will access that base unit only. Calls
(both incoming and outgoing) can be conducted
only via the selected base unit, even if the radio
cells overlap with neighbouring base units.
L The default setting is "AUTO".
62
1
Press {j}.
2
Press {e} or {v} repeatedly to display
"SETTING HS".
3
Press {>}.
4
Press {e} or {v} repeatedly to display
"SELECT BS".
5
Press {>}.
6
Press {e} or {v} repeatedly to select
"AUTO" or a specific base unit number.
7
Press {>} or {j}.
L The handset starts searching for the base
unit.
8.3 Selecting the ringer
mode
You can select how the handsets ring for
incoming calls from 3 patterns:
– "1": All handsets ring (default).
– "2": Selected handset(s) rings.
– "3": Selected handset(s) rings, then all
handsets ring.
Setting all handsets to ring
1
Press {j}.
2
Press {e} or {v} repeatedly to display
"SETTING BS".
3
Press {>}.
L "INPUT CODE" will be displayed.
4
Press {1}.
5
Enter the 4-digit base unit PIN.
L The default PIN is "0000".
6
Press {1} to select "1".
7
Press {>} or {j}.
8
Press {ih}.
Setting the selected handset(s) to ring
1
Press {j}.
2
Press {e} or {v} repeatedly to display
"SETTING BS".
3
Press {>}.
L "INPUT CODE" will be displayed.
4
Press {1}.
5
Enter the 4-digit base unit PIN.
L The default PIN is "0000".
6
Press {2} to select "2".