Initial Programming
2.6 Date and time
You must set the date and time for both the
handset and the base unit.
2.6.1 Setting the time and date
on the handset
{>}{e}{v}
Important:
L Confirm that the mains lead is connected.
L Ensure that w is not flashing.
L If a power failure occurs, the time and date
for the handset needs to be reset.
1
Press {j}.
2
Press {e} or {v} repeatedly to display the
following.
3
Press {>}.
4
Press {*}.
5
Enter the current hour/minute by selecting 2
digits for each.
Example: 15:15 (24 hour clock entry)
Press {1}{5}{1}{5}.
L If you make a mistake, press {C}. Digits
are cleared from the right.
6
Press {>} or {j}.
{j}
{ih}
{C}
7
Press {>}.
8
Press {*} 2 times.
9
Enter the current day/month/year by
selecting 2 digits for each.
Example: 10 August, 2003
Press {1}{0} {0}{8} {0}{3}.
L If you make a mistake, press {C}. Digits
are cleared from the right.
10
Press {>} or {j}.
11
Press {ih} to exit the program.
2.6.2 Setting the date and time
on the base unit
{<}{>}
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display the
following.
3
Press {SET}.
L Cursor (|) will appear on the display.
4
Enter the current day/month/year by
selecting 2 digits for each.
2. Preparation
{SET}
{MENU}
SYSTEM SET UP
PRESS NAVI.[( )]
SET DATE & TIME
PRESS SET
D:|
0 1/M:01/Y:03
TIME: 12:00AM
23