Konica Minolta MAGICOLOR 2300W User Manual page 98

Symptom
Entire sheet
is printed in
black or
color.
Image is too
light; there is
low image
density.
Image is too
dark.
90
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Cause
One or more of the
toner cartridges are
defective.
The OPC drum
cartridge is damaged.
Laser lens cover is
dirty.
The media is moist
from humidity.
There is not much
toner left in the
cartridge.
One or more of the
toner cartridges are
defective.
Media type may be
set incorrectly.
One or more of the
toner cartridges are
defective.
The OPC drum
cartridge is damaged.
Solving Problems with Printing Quality
Solution
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Status Display's Print/Toner
Replace... menu).
Remove the OPC drum cartridge and
check for damage. If it is damaged,
replace it.
Clean the laser lens cover and perform
an AIDC calibration cycle (Status
Display's Print/Power On Test menu).
Wait until the test is finished, the
Ready indicator on the control panel
lights up, and the Error indicator turns
off.
Remove the moist media and replace
with new, dry media.
Replace the toner cartridge (Status
Display's Print/Toner Replace...
menu). If the new cartridge capacity is
different, select the toner cartridge
capacity (Status Display's Print/Toner
Replace... menu).
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Status Display's Print/Toner
Replace... menu).
When printing envelopes, labels,
postcards, thick stock, or
transparencies specify the appropriate
media type in the printer driver.
Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Status Display's Print/Toner
Replace... menu).
Remove the OPC drum cartridge and
check for damage. If it is damaged,
replace it.