Solving Other Problems; Solving Other Problems - Konica Minolta MAGICOLOR 2300W User Manual

Solving Other Problems

Symptom
Printer
power is not
on.
Data was
sent to the
printer, but it
doesn't print.
The Status
Display
displays
Toner
much
Low
sooner than
expected

Solving Other Problems

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Cause
The power cord is not
correctly plugged into
the outlet.
Something is wrong
with the outlet
connected to the
printer.
The power switch is
not correctly turned
on (I position).
The printer is
connected to an
outlet with a voltage
or frequency that
does not match the
printer specifications.
An error message is
displayed in the
Status Display.
A high-capacity toner
cartridge was loaded,
but the toner size was
set at standard
capacity.
The toner cartridge is
defective.
Solution
Turn the power switch off (O position),
then remove the power cord from the
outlet and plug it back in.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
Set the power switch to the off (O)
position, then set it back to the on (I)
position.
Use a power source with the
specifications listed in appendix A,
"Technical Specifications."
Handle according to the message
displayed.
In the Status Display's Print menu,
choose Toner Replace... and then
select the capacity listed on the toner
cartridge label.
In the Status Display's Print menu,
choose Toner Replace..., remove the
toner cartridge ,and check for damage.
If it is damaged, replace it.
83