Konica Minolta MAGICOLOR 2300W User Manual page 105

This message...
Video Under-run
Paper Jam at Duplex
Lower
Paper Jam at Duplex
Upper
Paper Jam in
Ejection
Paper Jam at Fusing
Unit Section
Paper Jam at Trans-
fer Roller
Paper Jam at Tray 1
Status, Error, and Service Messages
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
means...
The amount of data to
be printed exceeds
the printer's internal
data transmission
speed.
Media has jammed in
the duplex unit.
Media has jammed
between the print
engine and the output
tray.
A media jam has
been detected
between the fuser
and output tray rollers
located near the top
cover.
Exit jams occur in the
media eject area.
Media has jammed
leaving the fuser
area.
Media jams occur in
the transfer roller
area. This type of jam
means that the media
did not make it to the
paper exit area.
Media has jammed
while being pulled
from the specified
tray 1.
do this...
Turn the printer off, and
then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example, by
decreasing the
resolution), and then try
printing again.
Locate and remove the
jam.
97