Symptom
Media is
wrinkled.
88
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
Cause
The media is moist
from humidity or
having water spilled
on the paper supply.
The transfer roller or
fuser unit may be
defective.
Unsupported media
is being used.
Solution
Remove the moist media and replace it
with new, dry media.
Check them for damage. If necessary,
contact Technical Support with the
error information. Go to http://
printer.konicaminolta.net/support or
see the Service & Support Guide for
support telephone numbers.
Use KONICA MINOLTA-approved
media. Refer to "Media Types" on page
12. Check http://
printer.konicaminolta.net/support (click
on "Answer Base") for currently
approved media.
Solving Other Problems