9. Programmable Features
9.2 Basic features
Feature/Code
Setting the date and time
{#}{1}{0}{1}
Setting your logo
{#}{1}{0}{2}
Setting your fax number
{#}{1}{0}{3}
Setting the dialling mode
{#}{1}{2}{0}
Setting flash time
{#}{1}{2}{1}
Changing the LCD display
contrast
{#}{1}{4}{5}
Setting the ringer pattern
{#}{1}{6}{1}
Changing the ring setting
in FAX ONLY mode
{#}{2}{1}{0}
62
Selection
Enter the date and time using the dial keypad. See page 25 for details.
Enter your logo using the dial keypad. See page 26 for details.
Enter your fax number using the dial keypad. See page 28 for details.
{1} "PULSE"
{2} "TONE" (default)
See page 23 for details.
The flash time depends on your telephone exchange or host PBX.
{0} "900ms"
{1} "700ms" (default)
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "200ms"
{7} "160ms"
{8} "110ms"
{9} "100ms"
{*} "90ms"
{#} "80ms"
Note:
L If the unit is connected via a PBX, PBX functions (transferring a
call, etc.) might not work correctly. Consult your PBX supplier for
the correct setting.
{1} "NORMAL" (default): For normal contrast.
{2} "DARKER": Used when the display contrast is too light.
{1} "A" (default)
{2} "B"
{3} "C"
To change the number of rings before the unit answers a call in FAX
ONLY mode.
{1} "1"
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
L If you are using the unit with an answering machine, set to more
than 4 (page 39).