Table of Contents
Advertisement
8. Multi-Function Station software
For details about the [Print] dialogue
box, click [?], then click the desired item.
Note:
L For Microsoft PowerPoint
[Color] or remove the check next to
[Grayscale] in the print dialogue so that
coloured text will be printed in grayscale.
3
Select [Panasonic KX-
FLB813FX]/[Panasonic KX-FLB803FX]
as the active printer.
L If you have changed the name of the unit
when installing, select that name from the
list.
L To change the printer settings, proceed
as follows.
For Windows 98/Windows Me:
Click [Properties], and then click the
desired tab. Change the printer settings,
and then click [OK].
For Windows 2000:
Click the desired tab and change the
printer settings.
For Windows XP:
Click [Preferences], and then click the
desired tab. Change the printer settings,
and then click [OK].
4
Click [Print] or [OK].
L The unit will start printing.
Note:
L To load paper, see page 18, 19.
L When using the manual input tray, load the
recording paper after step 4.
L For details about the paper specifications,
see page 54, 94.
Setting the printer properties
You can change the printer setting in step 3. We
recommend that you test paper (especially
special sizes and types of paper) on the unit
before purchasing large quantities.
54
You can change the settings on following the
tabs.
Paper: Paper size, paper type, etc.
Output: Pages per sheet, output tray (KX-
FLB813 only), etc.
Quality: Graphics mode, resolution, toner save
feature, etc.
Note:
®
, select
8.4.2 Transparencies
Use transparencies designed for laser printing.
We recommend the following:
3M
8.4.3 Labels
Use labels designed for laser printing. We
recommend the following:
Avery
5160/5161/5162/5163/5164/5165/5167/5168
XEROX
LWH100/LWH110/LWH120/LWH130/LWH140
L To select [Envelope] for paper type on the
[Paper] tab, you need to select [Envelope
#10] or [Envelope DL] for paper size.
L You can select the output tray for each
printing on the [Output] tab. To change the
default output tray, see page 59 (KX-FLB813
only).
L When printing from a computer, the toner
save feature on the [Quality] tab overrides
the unit's toner save setting (feature #482 on
page 63).
®
CG3300/CG5000
L Use the manual input tray to print
transparencies.
L Load transparency sheets one page at a
time for printing, print-side down.
L Printed transparency will be stacked on
the upper output tray (KX-FLB813 only).
L Remove each transparency after printing
and place it on a flat surface to cool and to
prevent it from curling.
L Do not re-use transparencies that have
already been fed through the unit. This
includes transparencies that have been fed
through and ejected without being printed on.
L Some types of transparencies have
instructions recommending which side to
print on. If the print quality is poor, try printing
on the other side.
®
®
L Use the manual input tray to print labels.
L Load label sheets one page at a time for
printing, print-side down.
L Printed label will be stacked on the upper
output tray (KX-FLB813 only).
L Remove each label after printing.
Advertisement
Table of Contents
