Replacing The Toner Cartridge And The Drum Unit - Panasonic KX-FLB803FX Operating Instructions Manual

Flat-bed multi-function laser fax with separator and flat-bed multi-function laser fax
Table of Contents

Advertisement

Replacement
10.4 Replacing the toner
cartridge and the drum
unit
When the display shows the following, replace
the toner cartridge.
To check the drum life and quality, please print
the printer test list (page 92) and refer to page 95
for information on the drum life. If printing quality
is still poor or "REPLACE DRUM" appears on the
display, replace the toner cartridge and drum
unit. To ensure that the unit operates properly,
we recommend the use of Panasonic toner
cartridge (Model No. KX-FA87E/KX-
FA87X/KX-FA85E/KX-FA85X) and drum unit
(Model No. KX-FA86E/KX-FA86X). See page
10 for accessory information.
To maintain print quality and machine life, we
recommend you to clean slots and openings
(page 6) and the inside of the unit (page 87, 90)
when replacing the toner cartridge and/or drum
unit.
Caution:
L We cannot be responsible for any damage
to the unit or degradation of print quality
which may occur from the use of a non-
Panasonic toner cartridge and drum unit.
L The drum unit contains a photosensitive
drum. Exposing it to light may damage the
drum.
Once you have opened the protection
bag:
– Do not expose the drum unit to light for
more than 5 minutes.
– Do not touch or scratch the black drum
surface.
– Do not place the drum unit near dust or
dirt, or in a high humidity area.
– Do not expose the drum unit to direct
sunlight.
L Do not disconnect the power cord. Loss
of fax documents in memory may occur.
L Do not leave the toner cartridge out of the
protection bag for a long time. It will
decrease the toner life.
L Do not add toner to the toner cartridge.
TONER LOW
TONER EMPTY
1
Before opening the protection bag of the new
toner cartridge, shake it vertically more than
5 times.
2
Remove the new toner cartridge from the
protection bag.
3
Lift the top cover release lever (1) and open
the top cover (2).
Important:
L Close the manual input tray (3) before
opening the top cover.
1
4
Caution:
The fuser unit (4) gets hot. Do not
touch it.
Note:
L Do not touch the transfer roller (5).
10. Help
2
5
3
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-flb813fx

Table of Contents