Table of Contents
Advertisement
L Do not use the following types of labels:
– Labels that are wrinkled, damaged or
separated from the backing sheet.
– Any sheet of labels that has spaces in it
where some of the labels have been
removed.
– Labels that do not completely cover the
backing sheet as follows.
8.4.4 Envelopes
Use envelopes designed for laser printing. We
recommend the following:
– High quality envelopes of 90 g/m
– Envelopes that have thin, sharply creased
leading edges,
– Envelopes that have diagonal seams, and
– Envelopes with a moisture content of 4% to
6% by weight.
L Use the manual input tray to print
envelopes.
L You can load 1 envelope of 90 g/m
at a time for printing, print-side down (1).
8. Multi-Function Station software
L Printed envelope will be stacked on the
upper output tray (KX-FLB813 only).
L Remove each envelope after printing.
Note:
L Wrinkles and waving may occur in some
cases, even if high quality envelopes are
used.
L Avoid printing in high humidity. High humidity
may cause the envelope to curl or seal the
envelope.
L Store envelopes away from moisture and
humidity, where they can lay flat and their
edges will not be bent or damaged.
Do not use envelopes with any of the
following characteristics (using these may
result in paper jams):
L Irregularly shaped envelopes
L Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage
L Envelopes with side seam construction
L Highly textured envelopes, or envelopes with
extremely shiny surfaces
L Envelopes that seal by removing a peel-off
strip
L Envelopes with more than one flap to be
sealed
L Self-adhesive envelopes
L Envelopes that are baggy or not sharply
2
creased
paper,
L Embossed envelopes
L Envelopes that have previously been printed
on
L Envelopes that include cotton and/or fibre
material
Side seam
construction
2
paper
1
Peel-off strip
Twisted
Curled
Waved
Dog-eared
Multiple flaps
Bent-edged
Self adhesive
55
Advertisement
Table of Contents
