Automatically Conserving Energy (Sleep Mode) - Konica Minolta BIZHUB C450P User Manual

2

Automatically conserving energy (Sleep mode)

If no operation is performed for a specified length of time, the machine
automatically enters a mode where it conserves energy.
Although the machine conserves more energy in Sleep mode than in Low
Power mode, the machine must warm up when Sleep mode is canceled to
begin printing again, therefore taking more preparation time than Low Power
mode.
As the factory default, the machine enters Sleep mode after 15 minutes.
To recover from Sleep mode
When a print job is received, the machine recovers from Sleep mode and
begins printing after it has finished warming up (within 99 seconds at normal
room temperature (23°C)).
Note
The Sleep mode can also be canceled by pressing any key in the control
panel.
!
Detail
The length of time until the machine enters Sleep mode can be changed.
For details, refer to "User Setting" on page 5-34.
2-38
Installation and operation precautions
bizhub C450P (Phase 3)