Konica Minolta BIZHUB C450P User Manual page 406

9
15
Remove any misfed paper.
16
Close the job separator cover.
17
While holding misfeed-clearing guide
FN6 open, pull out any misfed paper.
18
Slide the finisher back against the machine.
7 CAUTION
Metallic parts on the inside of the upper cover are very hot.
!
Detail
For details on the positions of paper misfeeds, refer to "Paper misfeed
indications" on page 9-6.
9-26
%Touching any part other than the paper may result in
burns.
Troubleshooting
bizhub C450P (Phase 3)