Konica Minolta BIZHUB C450P User Manual page 88

3
For Mac OS 9.2
After connecting this machine, it can be used as a printer by selecting the
PostScript printer from the Chooser and by specifying the printer description
(PPD) file.
First, copy the printer description (PPD) file onto the Macintosh computer.
1
Insert the Macintosh printer driver CD-ROM into the Macintosh
computer's CD-ROM drive.
2
Open the OS 9_x folder in English\Driver on the CD.
3
Select the KONICAMINOLTAC450UVxxx.ppd file, and then copy it into
the Printer Description File folder in Hard Disk\System
Folder\Extentions.
Next, select a printer.
The printer driver can use a standard Macintosh LaserWriter.
4
On the Apple menu, click "Chooser".
5
Make sure that "AppleTalk" is set to "Active", and then click the
"LaserWriter" icon.
6
From the "Select a PostScript Printer" list, click the applicable printer
for the printing system, and then click the [Create] button.
The PostScript printer description (PPD) file selection screen appears.
What should be done if a different PPD file has already been
?
selected?
% Click the [Setup] button, and then click the [Select PPD] button
from the screen that is already displayed.
7
Select the applicable PPD file, and then click the [Select] button or the
[Open] button.
The setting screen for adding Options appears.
8
Select the options that are installed on this machine.
9
Click the [OK] button.
The Chooser window appears again.
10
Close the Chooser window.
3-24
Setting up the printer driver
bizhub C450P (Phase 3)