3
For Windows XP/Server 2003
1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn on the computer.
–
Do not disconnect or connect the cable while the computer is
starting up.
2
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
–
Konica Minolta PCL driver: User Software CD-ROM
–
Konica Minolta PostScript driver: PostScript Printer Driver CD-
ROM
3
Turn this machine on.
–
The Add New Hardware Wizard starts up.
If the Add New Hardware Wizard does not appear, turn this
machine off, then on again.
–
When turning the machine off, wait for 10 seconds or longer before
turning it on again; otherwise the machine may not function
normally.
4
Select "Install from a list or specific location (Advanced)", and then
click the [Next] button.
5
Under "Search for the best driver in these locations", select "Include
this location in the search", and then click the [Browse] button.
6
Depending on the operating system and printer driver that you are
using, specify the folder on the CD-ROM that contains the printer
driver, and then click the [OK] button.
–
Konica Minolta PCL driver: Folder at Driver\bizhubC450 on the
User Software CD-ROM
–
Konica Minolta PostScript driver: Folder at Driver\bizhubC450 on
the PostScript Printer Driver CD-ROM
7
Click the [Next] button, and then follow the on-screen instructions.
–
When the Digital Signature dialog box appears, click the [Continue]
button.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed
printer appears in the Printers and Faxes window.
3-16
Setting up the printer driver
bizhub C450P (Phase 3)