Call Options - Panasonic KX-TCD240E Operating Instructions Manual

TCD240E(e).book Page 34 Thursday, June 9, 2005 9:14 AM
Base Unit Settings

Call options

Changing the recall time
Change the recall time, if necessary,
depending on the requirements of your
service provider or PBX.
1
Press {j/OK}.
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
35).
4
Select "Call Options", then press
{>}.
5
Select "Recall", then press {>}.
6
Select the desired setting, then press
{>}.
7
Press {ih}.
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
1
Press {j/OK}.
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
35).
4
Select "Call Options", then press
{>}.
5
Select "Pause Length", then press
{>}.
6
Select the desired setting, then press
{>}.
7
Press {ih}.
34 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Storing/changing emergency
numbers
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 30).
1
Press {j/OK}.
2
Select "Base Unit Setup", then
press {>}.
3
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page
35).
4
Select "Call Options", then press
{>}.
5
Select "Emergency No.", then press
{>}.
6
Select a memory location, then press
{>}.
L If the memory location already
contains an emergency number, the
number is displayed.
7
Enter/edit the number, then press
{j/OK}.
L To erase an emergency number, press
and hold {C/T}.
8
Press {ih}.
Setting call restriction
You can restrict the base unit or selected
handsets from dialling certain numbers. Up
to 6 phone numbers can be stored. Storing
area codes here will prevent the restricted
extensions (the base unit or selected
handsets) from dialling any phone number in
that area code.
Important:
L Call restriction can be set using handset 1
only. (To confirm which handset is handset
1, press {x} and {1} on the base unit.
Handset 1 will ring.)
1
Press {j/OK}.