Battery Replacement - Panasonic KX-TCD240E Operating Instructions Manual

Digital cordless answering system
Hide thumbs Also See for KX-TCD240E:
Table of Contents

Advertisement

TCD240E(e).book Page 13 Thursday, June 9, 2005 9:14 AM
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
Note:
L It is normal for the handset to feel warm
during charging.
L It takes 7 hours to fully charge the
batteries, however, you can use the
handset before the batteries are fully
charged.
L Clean the charge contacts (page 10) of
the handset and base unit with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Battery strength
Battery icon
Battery strength
High
5
Medium
6
Low
7
When flashing: Needs
to be charged.
Note:
L When 7 flashes, recharge the handset
batteries. 7 will continue to flash until
the batteries have been charged for at
least 15 minutes.
L If the handset is turned off, it will be turned
on automatically when it is placed on the
base unit.
Battery life
After your Panasonic batteries are fully
charged, you can expect the following
performance:
Ni-MH batteries (700 mAh)
Operation
While in use (talking)
While not in use
(standby)
Note:
L Actual battery performance depends on a
combination of how often the handset is in
use (talking) and how often it is not in use
(standby).
L Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.

Battery replacement

If 7 flashes even after the handset
batteries have been charged for 7 hours, the
batteries must be replaced.
Preparation
Operating time
20 hours max.
170 hours max.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents