Cover Sheet Tray Size - Konica Minolta BIZHUB 750 User Manual

Utility

Cover sheet tray size

Adjust the cover sheet tray size if the paper cannot be detected correctly or
if one side of the cover sheet feeder is adjusted.
0 This parameter is available only if cover sheet feeder PI-501 is installed.
1
Display the Administrator Setting screen.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [7 Cover Sheet Tray Size].
The Cover Sheet Tray Size screen appears.
6
Touch the button for the paper tray to be adjusted.
7
Load A4 w -size paper into the selected paper tray.
8
Press the [Start] key.
– Adjust the cover sheet feeder tray.
9
To adjust the other paper tray, repeat steps 6 through 8.
10
Touch [Close].
– The Finisher Adjustment screen appears again.
bizhub 750/600
12
12-81