Konica Minolta BIZHUB 750 User Manual page 292

7
3
Touch [Custom Size].
The Custom Size screen appears.
4
Type in the length (X) and width (Y) of the paper.
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (139.7 mm to 458.0 mm)
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (100.0 mm to 314.0 mm)
– If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
? Can paper sizes be stored?
% Two specified non-standard paper sizes can be stored.
% For details on storing paper sizes, refer to "To store a non-standard
paper size (Custom Size settings store)" on page 7-16.
% To recall a stored paper size, touch [memory1] or [memory2].
7-14
Copy paper/original
bizhub 750/600