Expert Adjustment - Konica Minolta BIZHUB 750 User Manual

Utility

Expert adjustment

Parameter
Original Image Density
Erase Ad-
justment
Printer Ad-
justment
2nd-Side Size Adjust-
ment
bizhub 750/600
Description
Specify the initial density of the quality of
the document. A density can be specified
for each Orig. Image Type setting.
Non Im- Specify the conditions for erasing the
age Area area framing the document.
Erase • Always: No limits are specified.
• Only When Auto size or ×1.0 is select-
ed: The frame around the document is
erased only if the "Auto Zoom" or
"×1.0" Zoom settings are selected.
• Do Not Erase When ×1.0 is selected:
The frame around the document is
erased only if a Zoom setting other
than "×1.0" is selected.
Non Im- Select whether the areas framing docu-
age Area ments are erased.
Erase Set- • Auto: The frame is erased automatical-
ting ly.
• Specify: Select the erasing method
and the document density. In addition,
the density can be adjusted to one of
five levels.
ADF Specify the frame width that is erased
Frame when using the ADF.
Erase
Leading The starting print position at the leading
Edge edge of the paper (with respect to the pa-
Adjust- per feed direction) can be adjusted in 0.1
ment mm increments. Adjustments can be
specified for each paper type.
Centering The starting print position at the left edge
of the paper (with respect to the paper
feed direction) can be adjusted in 0.1 mm
increments.
Vertical If the copy image is distorted (stretched or compressed), the paper
Adjust- feed speed and printing speed can be synchronized to adjust the
ment copy image. For details on making this adjustment, contact your
technical representative.
Horizon- If the copy image is distorted (stretched or compressed), the zoom
tal Adjust- ratio in the transverse document feed direction can be adjusted. For
ment details on making this adjustment, contact your technical represent-
ative.
The 2nd-side size can be adjusted for
each tray.
12
Settings (Default set-
tings are underlined.)
Text:
0 (light) to 5 (dark): 3
Text/Photo:
0 (light) to 5 (dark): 3
Dot Matrix Original:
0 (light) to 5 (dark): 2
Photo:
0 (light) to 5 (dark): 1
Always/ Only When Auto
size or ×1.0 is selected/
Do Not Erase When ×1.0
is selected
Auto/ Specify
How to Erase:
Diagonal Erase/
Square Erase
Original Density:
1 (light) to 5 (dark):
3 (Std.)
0 to 5 mm: 3 mm
Normal: –3.0 to 6.0 mm:
0.0 mm
Thick paper: –3.0 to 6.0
mm: 0.0 mm
-6.4 to 6.3 mm: 0.0 mm
Tray 1 to 4, Bypass, LCT
key: No Selection/ -
0.1%/ -0.2%/ -0.3%
12-35