Before making copies
2.6
Loading paper into the bypass tray
Feed paper through the bypass tray when you wish to copy onto paper with
a size not loaded into a paper tray or onto overhead projector transparencies
or trace paper.
If the paper is loaded into the bypass tray, specify the paper setting for the
bypass tray. For details on specifying the paper setting, refer to "Specifying
the paper setting for the bypass tray" on page 7-9.
Reminder
Do not use the following types of treated paper, otherwise the machine
may be damaged.
Heat-sensitive paper
Conductive paper (such as silver paper and carbon paper)
Color overhead projector transparencies
Inkjet printer paper
To load paper (bypass tray)
1
Open the bypass tray.
–
Open the bypass tray to the right,
and then open the folded tray to
the right.
2
Insert the paper as much as possible into the feed slot.
3
Slide the lateral guides to fit the size
of paper being loaded.
bizhub 750/600
2
2-47