Adjusting The Z-Fold Positions - Konica Minolta BIZHUB 750 User Manual

Utility

Adjusting the Z-fold positions

The first and second folding positions for Z-Fold can be adjusted.
0 Use the "Z-Fold" function to print a single sample copy, and then perform
the adjustment while checking the sample that was created. When mak-
ing adjustments to settings for both the "1st Z-Folded Position" and "2nd
Z-Folded Position", be sure to first adjust the setting for the "1st Z-Fold-
ed Position".
0 The Z-fold position can be adjusted only when optional Z-folding unit ZU-
601/ZU-602 is installed.
1
Display the Administrator Setting screen.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [4 Z-Fold Position Adjustment].
The Z-Fold Position Adjustment screen appears.
6
Touch [1st Z-Folded Position] or [2nd Z-Folded Position].
– Touch [1st Z-Folded Position]to adjust the first folding position.
– Touch [2nd Z-Folded Position] to adjust the second folding posi-
tion.
The 1st Z-Folded Position or 2nd Z-Folded Position screen appears.
bizhub 750/600
12
12-73