8
Printing the page number ("Page #" function)
To copy using the "Page #" function
1
In the Stamp/Overlay screen, touch [Page #].
–
For details on displaying the Stamp/Overlay screen, refer to "To
display the stamp/overlay screen" on page 8-85.
The Page # screen appears.
2
Under "Start No.", touch either [Page #] or [Chapter].
–
Using the keypad, type in the starting page number.
–
The setting for "Start No." can be set to a number between -99999
and 99999.
–
The starting chapter number can be set between -100 and 100.
–
When specifying a setting for "Start No.", switch the number be-
tween positive and negative by pressing the [ ] key.
–
To cancel changes to the settings, touch [Cancel].
–
To cancel the "Page #" function, touch [OFF].
8-90
Application functions
bizhub 750/600