Konica Minolta BIZHUB 750 User Manual page 540

12
12
If the desire print results are not achieved, change the adjustment val-
ue.
– If the positions of the punched holes are not aligned on the paper,
touch [+] and [–] to increase or decrease the adjustment (between
-16.0 mm and 16.0 mm).
If the adjustment value is large, the edge of the paper may become
folded.
13
Repeat steps 7 through 11 until the desired print results are achieved.
14
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
Note
When PK-504/PK-505 and ZU-601/ZU-602 are installed, adjustments
can be made using both the "Punch Adjustment" and "Z-Fold Position
Adjustment" parameters. Contact your technical representative.
12-72
Utility
bizhub 750/600