Zebra Display; Colour Bar - Panasonic HDC-SD5 Operating Instructions Manual

Recording

Zebra display

This is for displaying the parts that
are too bright.
Parts where white saturation (colour saturation)
is likely to occur (extremely brightly lit or shiny
parts) are displayed with diagonal lines (zebra
pattern).
¬ Rotate the mode dial to select
Press the MENU button, then select
[ADVANCED] # [ZEBRA] # [ON]
and press the cursor button.
A Zebra pattern
≥ You can record an image with little white
saturation if you manually adjust the shutter
speed or brightness (iris/gain) (l 63).
To cancel the zebra display
Press the MENU button, then select
[ADVANCED] # [ZEBRA] # [OFF] and press
the cursor button.
≥ The zebra pattern does not appear on the
images actually recorded.
58
VQT1H64
A

Colour bar

This is for displaying a colour bar to
check the colour tone.
This unit displays a 7 colour bar which is useful
for adjusting the picture quality of the TV or the
external monitor.
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[ADVANCED] # [COLOUR BARS] #
[ON] and press the cursor button.
To cancel the colour bar
Press the MENU button, then select
[ADVANCED] # [COLOUR BARS] # [OFF] and
press the cursor button.
≥ This function is cancelled when the power is
turned off.
≥ The icon will not be displayed even if you press
the cursor button.
.