Dividing A Scene To Delete - Panasonic HDC-SD5 Operating Instructions Manual

4
(Only when [SELECT] is selected in step 2)
Press the button.
5
When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other scenes
Repeat steps 3-5.
To complete editing
Press the MENU button.
≥ You can also delete scenes by pressing the
MENU button, selecting [EDIT SCENE] #
[DELETE] and then selecting [ALL SCENES]
or [SELECT].
≥ To delete an unwanted part of a scene, divide
the scene first, and then delete the
unnecessary part.
≥ Scenes which cannot be played back (the
thumbnails are displayed as
deleted.
≥ Protected scenes cannot be deleted.
≥ Do not open the SD card/battery cover while
deleting. The deletion will stop.
≥ In case of [ALL SCENES], the deletion may
take time if there are many scenes on the SD
card.
≥ Do not turn off this unit while deleting.
≥ When you delete scenes, use a battery with
sufficient battery power or use the AC adaptor.
≥ If you delete scenes recorded on other
products with this unit, all the data related to
the scenes may be deleted.

Dividing a scene to delete

This is for dividing a scene into two to
delete an unnecessary portion.
To delete an unnecessary portion of a scene, first
divide the scene and then delete the
unnecessary portion.
¬ Rotate the mode dial to select
and then select the [
picture playback) tab.
1
2
) cannot be
The selected scene is played back.
3
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 65, 66)
4
Press the MENU button, then
select [EDIT SCENE] # [DIVIDE]
# [SET] and press the cursor
button.
Select the scene to be divided,
then press the cursor button.
When you reach the area where
you want to divide the scene,
press the cursor button down to
set the dividing point.
When the confirmation message
appears, select [YES], then press
the cursor button.
Editing
] (motion
71
VQT1H64