Panasonic HDC-SD5BNDL Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Camcorder
  5. HDC-SD5BNDL
  6. Operating instructions manual

Panasonic HDC-SD5BNDL Operating Instructions Manual

High definition video camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Before connecting, operating or adjusting this product, please read the instructions completely.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

Operating Instructions

High Definition Video Camera
HDC-SD5PP
Model No.
VQT1H62

Advertisement

Table of Contents
loading

Related Manuals for Panasonic HDC-SD5BNDL

Summary of Contents for Panasonic HDC-SD5BNDL

  • Page 1: Operating Instructions

    Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca Operating Instructions...

  • Page 2: Things You Should Know

    Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right.
  • Page 3 Model No.: HDC-SD5PP Responsible party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4 Batteries Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥...

  • Page 5: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
  • Page 6 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or...
  • Page 7 ª Cards that you can use with this unit SD Memory Card and SDHC Memory Card For the purposes of these operating instructions, the following cards are referred to as “the SD card”. SD Memory Card SDHC Memory Card ≥ If you wish to use Memory Cards that are 4 GB and 8 GB, only SDHC Memory Cards can be used.

  • Page 8: Table Of Contents

    Contents Accessories ... 10 Quick Guide ... 11 Before using Features of the High Definition Video Camera ... 14 Parts identification and handling ...19 Using the LCD monitor ...21 Using the remote control ... 22 Cards that you can use with this unit ...24 Setup Charging the battery ...
  • Page 9 2 Connecting with the component cable (supplied) and the AV cable (supplied) ...81 3 Connecting with the AV cable (supplied) ...82 With a DVD burner ... 83 Connecting a DVD burner to copy to a disc ...83 Playing back a disc inserted in the DVD burner ...87 Managing a disc inserted in the DVD burner ...88...

  • Page 10: Accessories

    Accessories Check the accessories before using this unit. Battery pack VW-VBG130 AC adaptor VW-AD21PP AC cable K2CA2CA00025 DC cable K2GJ2DC00020 Remote control N2QAEC000023 Button-type battery CR2025 VQT1H62 AV cable K2KC4CB00024 Component cable K2KZ9DB00004 USB cable K2KZ4CB00011 CD-ROM...

  • Page 11: Quick Guide

    Quick Guide ª Charging the battery Connect the AC cable to the AC adaptor and the AC outlet. Put the battery on the battery mount by aligning the mark, and then securely plug it in. ≥ The output plug of the AC cable is not completely connected to the AC adaptor jack.
  • Page 12 ª Inserting/removing an SD card Set the mode dial to OFF. While sliding the SD CARD/ BATTERY OPEN lever A, move the SD card/battery cover and open it. Insert/remove the SD card into/from the card slot. ≥ When inserting an SD card, face the label side B in the direction shown in the illustration and press it straight in as far as it will go.

  • Page 13: Motion Picture Playback

    ª Motion picture playback Rotate the mode dial to select Press the cursor button up and then select the [ ] (motion picture playback) tab. A Motion picture playback tab Select the scene to be played back. B Previous page C Next page D Scene number Press the cursor button.

  • Page 14: Before Using

    Before using Before using Features of the High Definition Video Camera Very clear high definition pictures This unit can record highly detailed high definition images to an SD card. You can watch images in high-resolution HD video if you connect this unit to a high definition TV and then play back the images.
  • Page 15 About the SDHC Memory Card and the compatibility of the recorded motion pictures (Be careful about the following.) About the SDHC Memory Card ≥ It is not compatible with devices other than those that support SDHC. ≥ If you use the SDHC Memory Card in another device, use a device that is SDHC compatible. (l 24) About the compatibility of the recorded motion pictures ≥...

  • Page 16: Turning The Power Off

    TV for details. ª What is the EZ Sync ≥ This function allows you to use your remote control for the Panasonic TV for easy operations when this unit has been connected to an EZ Sync automatic linked operations.

  • Page 17: Important Notice

    Saving data to a disc If you connect the DVD burner (VW-BN1; optional) and this unit with a Mini AB USB Connection Cable (supplied with the DVD burner), you can copy motion picture data recorded on an SD card with this unit to a DVD disc.
  • Page 18 Before using Saving data to a computer You can use the supplied software (HD Writer 2.0E for SX/SD) to copy data recorded an SD card with this unit to the hard disk of the computer. A USB cable (supplied) ª What you can do with HD Writer Copying data to a computer You can copy data on an SD card to the hard disk of the computer.

  • Page 19: Parts Identification And Handling

    Parts identification and handling Lens (LEICA DICOMAR) Built-in flash (l 54) Outlet (cooling fan) Recording lamp (l 109) White balance sensor/remote control sensor (l 23, 62) Lens cover PRE-REC button [PRE-REC] (l 44) Mode dial (l 31) LCD monitor open button [LCD OPEN] (l 21) 10 Delete button [ ] (l 70, 72)
  • Page 20 Before using COMPONENT 27 Disc copy button [DISC COPY] (l 85) 28 Reset button [RESET] (l 118) 29 LCD monitor (l 21) Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.

  • Page 21: Using The Lcd Monitor

    Tripod receptacle The tripod receptacle is a hole used to mount a tripod for the unit. Use of Panasonic’s VW-CT45 (optional) standard tripod is recommended. (For details on mounting the tripod, refer to the operating instructions for the tripod.)

  • Page 22: Using The Remote Control

    Before using Adjust the angle of the LCD monitor as desired. ≥ It can be rotated 180° towards the lens A and 90° towards the opposite direction B. ≥ The brightness and color level of the LCD monitor can be adjusted. (l 40) ≥...

  • Page 23: Remote Control Usable Range

    Dispose of used batteries according to the manufacturer’s instructions. Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated.

  • Page 24: Cards That You Can Use With This Unit

    Before using Cards that you can use with this unit Card type Capacity 8 MB, 16 MB Motion picture Cannot be recording used. Still picture recording * The recording may suddenly stop during motion picture recording depending on the SD card you use. (l 44) This unit (an SDHC compatible device) is compatible with both SD Memory Cards and SDHC Memory Cards.
  • Page 25 ª About SD cards that you can use for motion picture recording We recommend using SD Memory cards and SDHC Memory cards conforming to Class 2 or higher of the SD Speed Class Rating or the following SD cards made by Panasonic for motion picture recording. Pro High Speed...

  • Page 26: Setup

    AC adaptor. Contact your dealer. ≥ Battery charging time (l 28) ≥ We recommend using Panasonic batteries (l 10, 28, 132). ≥ If you use other batteries, we cannot guarantee the performance/quality of this product.

  • Page 27: Inserting/Removing The Battery

    Inserting/removing the battery Inserting the battery While sliding the SD CARD/ BATTERY OPEN lever A, move the SD card/battery cover and open it. Insert the battery until it clicks while paying attention to the direction of the battery. B Push the center of the battery until it locks. Close the SD card/battery cover.

  • Page 28: Charging And Recording Time

    ≥ In order to safely use the unit, we recommend that you use genuine Panasonic batteries which have been tested by our quality control process.
  • Page 29 ª About the remaining battery capacity indication The remaining battery capacity is displayed in minutes when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. ≥ The display changes as the battery capacity reduces.

  • Page 30: Connecting To The Ac Outlet

    Setup Connecting to the AC outlet Connect the AC cable to the AC adaptor and the AC outlet. Connect the DC cable to the AC adaptor. While sliding the SD CARD/ BATTERY OPEN lever A, move the SD card/battery cover and open it.

  • Page 31: Selecting A Mode (Turning The Unit On/Off)

    Selecting a mode (Turning the unit on/off) Rotate the mode dial to switch to recording, playback or power OFF. ≥ Rotate the mode dial slowly. How to turn on the power While pressing the lock release button, set the mode dial to ≥...

  • Page 32: Quick Start

    Setup Quick start When quick start is ON the battery power is still being consumed, even when the LCD monitor is closed. This unit will resume recording/pause mode about 1.7 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced.

  • Page 33: Inserting/Removing An Sd Card

    Inserting/removing an SD card Be sure to set the mode dial to OFF before inserting/removing an SD card. If the SD card is inserted or removed while the power is on, this unit may malfunction or the data recorded on the SD card may be lost.

  • Page 34: How To Use The Cursor Button

    Setup How to use the cursor button This unit has a cursor button A for selecting functions, performing operations etc. so it is easy to operate this unit with one hand. B Operating the operation icons and menu screens that are displayed Basic operations The following describes operations on the menu screen and selection of files on the thumbnail...
  • Page 35 Operation icons displayed in each mode Recording mode Icon (1/3) (2/3) Ø ß (3/3) Set the AUTO/MANUAL/FOCUS switch to MANUAL. In manual mode [MANUAL] (4/4) Set the AUTO/MANUAL/FOCUS switch to FOCUS. In manual focus mode [FOCUS] (5/5) ≥ The shaded operation icons are not displayed while recording. ≥...

  • Page 36: Playback Mode

    Setup Playback mode ( Icon Direction ∫ Playback mode ( Icon Direction ∫ VQT1H62 In motion picture playback) Function Playback/pause Stop playback and show thumbnails Rewind (during playback) Reverse slow/frame playback (during pause) Fast forward (during playback) Forward slow/frame playback (during pause) In still picture playback) Function Slide show start/pause...

  • Page 37: Language Selection

    Help mode The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in recording mode. ¬ Rotate the mode dial to select Press the cursor button to display the icon. Move the cursor button right to select [ Move the cursor button up, left or right to select the desired icon.

  • Page 38: Submenu Item

    Setup Move the cursor button right or press the cursor button. ≥ The submenu B is displayed. Move the cursor button up or down in order to select the submenu item. C Current settings on menus Move the cursor button right or press the cursor button.

  • Page 39: Setting Date And Time

    Press the MENU button to exit the menu screen. MENU ENTER Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. ≥ Move the cursor button up or down to select [YES], press the cursor button and then perform steps 2 and 3 below to set the date and time.

  • Page 40: Adjusting Lcd Monitor

    Setup date and time will appear. Select [YES] and set the date and time. Adjusting LCD monitor Adjusting the brightness and the color level of the LCD monitor Press the MENU button, then select [SETUP] # [LCD SET] # [YES] and press the cursor button.

  • Page 41: Recording

    Before recording First, format the SD card if one which has been used on another device is going to be used for the first time on this unit. (l 75) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
  • Page 42 Recording ª About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, color balance (white balance) and focusing will be adjusted automatically. jAutomatic white balance (l 127) jAuto focus (l 128) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness.

  • Page 43: Recording Motion Pictures

    Recording motion pictures Record motion pictures on an SD card. ≥ Use an SD card that can be used for motion picture recording. (l 25) ≥ This unit records high definition images that are compatible with the 16:9 aspect ratio of a wide-screen TV.

  • Page 44: Pre-Rec Function

    At this time, the following message appears. When motion pictures are to be recorded, use a Panasonic SD card or another SD card which can be used to record motion pictures. (l 25) REC STOPPED. NOW WRITING.

  • Page 45: Recording Modes And Recordable Time Available For The Motion Picture

    ¬ Rotate the mode dial to select Press the MENU button, then select [VIDEO] # [REC MODE] # desired item and press the cursor button. ª Approximate recordable time for an SD card made by Panasonic SD card memory 256 MB 2 min...

  • Page 46: Recording Still Pictures (Jpeg Images)

    Recording Recording still pictures (JPEG images) Record the still picture on an SD card. ≥ This number of recording pixels for still pictures is compatible with the 16:9 aspect ratio of a wide-screen TV. They are recorded at 1920k1080. Rotate the mode dial to select The lens cover opens automatically.
  • Page 47 ≥ If the write protection switch on the SD card is set to LOCK, it cannot be used for recording. ≥ The PHOTO SHOT button on the remote control cannot be pressed halfway. ≥ If the [PICT. QUALITY] is set to [ mosaic-pattern noise may appear on a playback image depending on the picture content.

  • Page 48: Number Of Pixels And Picture Quality For Still Picture Recording

    Recording About simultaneous recording (recording still pictures while recording motion pictures) You can record still pictures even while recording motion pictures. While recording motion pictures, press the PHOTO SHOT button fully (press to the bottom) to take the picture. ≥ The PHOTO SHOT button cannot be pressed halfway in the simultaneous recording.

  • Page 49: Recording Functions

    Recording Functions Zoom in/out function The maximum optical zoom ratio is 10k. ¬ Rotate the mode dial to select Move the zoom lever. T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) ≥ If you take your finger off the zoom lever during zoom operation, the operation sound may be recorded.

  • Page 50: Recording Yourself

    Recording ≥ The stereo effect will be reduced with tele-shots. Recording Yourself You can record yourself while viewing the LCD monitor. ¬ Rotate the mode dial to select Rotate the LCD monitor towards the lens side. The image is horizontally flipped as if you see a mirror image.

  • Page 51: Fade In/Fade Out Function

    Fade in/fade out function Fade in: The image and audio gradually appear. Fade out: The image and audio gradually disappear. ¬ Rotate the mode dial to select Press the cursor button. Then move the cursor button down to display the icon shown in the illustration.

  • Page 52: Magicpix Function

    Recording MagicPix function This allows recording in dark locations. This function allows you to record color images in very low light situations. (Minimum required illumination: approx. 1 lx) Attach this unit to a tripod, and you can record images free from vibration. ≥...

  • Page 53: Backlight Compensation Function

    Backlight compensation function This is for preventing a backlit subject from being darkened. Use this function when the light is emanating from behind the subject and the subject appears dark. ¬ Rotate the mode dial to select Press the cursor button. Then move the cursor button down to display the icon shown in the illustration.

  • Page 54: Built-In Flash

    Recording ≥ The self-timer is canceled if the power is turned off or the mode dial is operated. ≥ The self-timer standby mode is canceled when you press the recording start/stop button to start motion picture recording. Even if you press the recording start/stop button while the self-timer is counting down, motion picture recording is not possible.

  • Page 55: Tele Macro Function

    Red eye reduction function Reduces the phenomena where human eyes become red from flashes. Press the MENU button, then select [PICTURE] [RED EYE] press the cursor button. To cancel the red eye reduction function Press the MENU button, then select [PICTURE] # [RED EYE] # [OFF] and press the cursor button.

  • Page 56: Image Stabilizer Function

    Recording Image stabilizer function This is for reducing image shakes (jitter) during recording. Reduces the image shaking (jitter) due to hand movement when recording. ¬ Rotate the mode dial to select Press the MENU button, then select [BASIC] # [O.I.S.] # [ON] and press the cursor button.

  • Page 57: Wind Noise Reduction Function

    To cancel the guide line function Press the MENU button, then select [BASIC] or [PLAY SETUP] # [GUIDE LINES] # [OFF] and press the cursor button. ≥ The guide lines do not appear on the images actually recorded. ≥ The guidelines are not displayed while rotating the LCD monitor frontward to record yourself.

  • Page 58: Zebra Display

    Recording Press the cursor button to set and then press the MENU button to finish the setting. D Microphone input level meter ≥ Microphone input level meter is displayed on the screen. To return to automatic setting Press the MENU button, then select [VIDEO] # [MIC LEVEL] # [AUTO], and press the cursor button.

  • Page 59: Auto Slow Shutter Mode

    ≥ This function is canceled when the power is turned off. ≥ The icon will not be displayed even if you press the cursor button. Auto slow shutter mode You can record bright pictures even in dark places by slowing the shutter speed. ¬...

  • Page 60: Manual Focus Adjustment

    Recording ≥ You can also cancel the scene mode function by setting the AUTO/MANUAL/FOCUS switch to AUTO. Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth.

  • Page 61: White Balance

    The center of the screen is enlarged. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus. ≥ The center of the screen is not enlarged when [MF ASSIST] is [OFF]. To restore to the automatic adjustment Press the AUTO/MANUAL/FOCUS switch down again to the FOCUS position.

  • Page 62: White Balance Sensor

    Recording ≥ Sunrise, sunset etc. To restore to the automatic adjustment Set the white balance mode to [ ≥ You can also restore the automatic adjustment by setting the AUTO/MANUAL/FOCUS switch to AUTO. To set the white balance manually Select [ ], fill the screen with a white subject.

  • Page 63: Manual Shutter Speed/Aperture Adjustment

    Manual shutter speed/aperture adjustment Shutter Speed: Adjust it when recording fast-moving subjects. When recording people outdoors at night, select the auto slow shutter mode and use a flash. Both the subject and the background will become brighter. Aperture: Adjust it when the screen is too bright or too dark.

  • Page 64: Playback

    Playback Playback Motion picture playback Play back motion pictures. Rotate the mode dial to select The lens cover closes. Press the cursor button up and then select the [ picture playback) tab. A Motion picture playback tab The motion pictures are displayed as thumbnails (reduced-size images).
  • Page 65 ) cannot be played back. An error message appears and the screen shows the thumbnails. ≥ The power will not turn off even if the LCD monitor is closed. ≥ The date/time displayed may be different from the recording date/time and it may take time to display the thumbnail display when playing back motion pictures not recorded on this unit.

  • Page 66: Playing Back Motion Pictures By Date

    Playback Frame-by-frame playback The motion picture is advanced one frame at a time. Move the cursor button up during playback to pause the playback. Move the cursor button right. (The frames will be advanced one at a time in the reverse direction when you move the cursor button left.) ≥...

  • Page 67: Repeat Playback

    ≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ] is displayed.) ≥ Playing back all the scenes returns if the power is turned off or the mode dial is operated. ≥...

  • Page 68: Still Picture (Jpeg Images) Playback

    Playback Still picture (JPEG images) playback Play back the still pictures recorded on the card. Rotate the mode dial to select The lens cover closes. Press the cursor button up and then select the [ playback) tab. A Still picture playback tab The still pictures recorded on the SD card are displayed as thumbnails (reduced-size images).
  • Page 69 ≥ Do not operate the mode dial during the slide show. ≥ It takes time to display the file, and how long it will take depends on the number of pixels of the file. ≥ Files which cannot be displayed as thumbnails (the thumbnails are displayed as be played back.

  • Page 70: Editing

    Editing Editing Editing scenes Deleting scenes This is for deleting scenes recorded on SD cards. The deleted scenes cannot be restored. Deleting scenes one at a time ¬ Rotate the mode dial to select and then select the [ picture playback) tab. Press the button during playback.

  • Page 71: Dividing A Scene To Delete

    ≥ To delete an unwanted part of a scene, divide the scene first, and then delete the unnecessary part. (l below) ≥ Scenes which cannot be played back (the thumbnails are displayed as deleted. ≥ Protected scenes cannot be deleted. ≥...

  • Page 72: Protecting Scenes

    Editing ≥ When [CANCEL ALL] is selected, the divided points of all scenes are deleted and the unit turns back to the setting that plays back all scenes even if you selected to play back the scenes by date. Protecting scenes This is for preventing scenes from being deleted by mistake.

  • Page 73: Protecting Still Pictures

    SCENES] and press the cursor button. ≥ When [ALL SCENES] is selected, all files on the SD card except the protected files will be erased. Proceed to step 5. (Only when [SELECT] is selected in step 2) Select the file to be deleted, then press the cursor button.

  • Page 74: Dpof Setting

    Editing To complete the settings Press the MENU button. DPOF setting This is for writing the printing data on an SD card. You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card.

  • Page 75: Card Management

    Card management Formatting Formatting SD cards This is for initializing cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer etc. ¬ Rotate the mode dial to select Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and...

  • Page 76: With Other Products

    ≥ Press the button again to erase the information. ≥ The screen on this unit will not change. When using the following Panasonic TVs, you can directly insert an SD card into the SD card slot on the TV and then play it back.

  • Page 77: Connecting With A Hdmi Cable (Optional)

    HDMI compatible high definition TV and then play back the recorded high definition images (l 14), you can enjoy them in high resolution with high quality sound. If you connect this unit to a Panasonic TV compatible with EZ Sync linked operations are possible. (l 79) ≥...

  • Page 78: Connecting With Hdmi

    With other products ª About the settings when connecting with HDMI When this unit is connected to another device with a HDMI cable, the output setting on this unit can be changed. HDMI output resolution You can switch the method to output the images. Press the MENU button, then select [SETUP] # [HDMI RESOLUTION] # desired item and press the cursor...
  • Page 79 TV.) ≥ If EZ Sync does not work properly, refer to page 119. Connect this unit to a Panasonic TV compatible with EZ Sync with a HDMI cable (optional). ≥ Use a HDMI cable (optional) A with the logo shown above.

  • Page 80: Operate With The Remote Control For The Tv

    ≥ Available linked operations between this unit and a Panasonic TV is different depending on the types of Panasonic TVs even if they are compatible with EZ Sync. Refer to the operating instructions of the TV for the operations that support on the TV.

  • Page 81: Connecting With The Component Cable (Supplied) And The Av Cable (Supplied)

    2 Connecting with the component cable (supplied) and the AV cable (supplied) ≥ Use the AC adaptor to free you from worrying about the battery running down. Connect this unit to a TV with the component cable (supplied) and the AV cable (supplied).

  • Page 82: Connecting With The Av Cable (Supplied)

    With other products ≥ Check that the plugs are inserted as far as they go. ≥ Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥ If the images are not displayed correctly on a wide-screen TV, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.) If the pictures are displayed squeezed horizontally on a regular TV (4:3), change the setting on this unit.

  • Page 83: With A Dvd Burner

    ª If the image or audio from this unit does not appear on the TV ≥ Check the connections. ≥ Check that the plugs are inserted as far as they go. ≥ Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.) ≥...
  • Page 84 With other products ª About the time it takes to copy The time it takes to copy differs depending on the number of scenes recorded on the SD card, the type of disc etc. Also, it takes time to automatically check the copied data. For this reason, it may take longer to copy than the recording time on the SD card.

  • Page 85: Cursor Button

    Copying all the scenes to discs ≥ We recommend preparing the necessary number of DVD-RAM or DVD-RW that have not been recorded on after being formatted by connecting this unit to a DVD burner, or the necessary number of new discs, and spare discs.
  • Page 86 With other products When the confirmation message appears, select [YES], then press the cursor button. ≥ A message appears indicating copying is complete. Eject the disc and disconnect the Mini AB USB Connection Cable from this unit. ≥ If you will delete the data on the SD card after copying is complete, be sure to play back the discs to check that they have been copied to correctly before deleting.

  • Page 87: Playing Back A Disc Inserted In The Dvd Burner

    Playing back a disc inserted in the DVD burner You can play back the motion pictures copied to a disc. ¬ Connect the AC adaptor supplied with the DVD burner to the DVD burner. (You cannot supply power to the DVD burner from this unit.) ≥...

  • Page 88: Managing A Disc Inserted In The Dvd Burner

    With other products Managing a disc inserted in the DVD burner Rotate the mode dial to select unit to the DVD burner, insert a disc in the DVD burner and then select [ ] (disc playback) tab (l 84). Formatting discs This is for initializing DVD-RAM and DVD-RW discs.

  • Page 89: With A Dvd Recorder Or Video Device

    With a DVD recorder or video device Dubbing images onto another video device ≥ Images are dubbed in standard quality. ≥ Use the AC adaptor to free you from worrying about the battery running down. Connect this unit to a video device.

  • Page 90: With A Printer (Pictbridge)

    With other products With a printer (PictBridge) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) PictBridge is an industry standard from the Camera & Imaging Products Association (CIPA) for direct printing.
  • Page 91 [5k7 INCH]: 2L size [4k6 INCH]: Postcard size [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. Select the layout setting on [PAGE LAYOUT]. [STANDARD]: Layout specific to the printer No frame print Frame print ≥...

  • Page 92: With A Computer

    With a computer Before using with a computer What you can do with a computer Data type Available function Copying data to a computer Writing data to media Copying data between media Motion picture Playing back on a computer Converting to MPEG2 Creating a DVD-Video disc Playing back on a computer Still picture...

  • Page 93: Contents On Provided Cd-Rom

    With a computer Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ª HD Writer 2.0E for SX/SD You can acquire data of motion pictures and still pictures on an SD card to the hard disk of the computer, easily edit (split, merge, delete) the motion pictures, then write the data to an SD card or disc.

  • Page 94: End User License Agreement

    With a computer End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.

  • Page 95: Operating Environment

    Operating environment ≥ A CD-ROM drive is necessary to install the supplied software applications. (A compatible DVD writer drive and media are necessary for writing to a DVD.) ≥ When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed.
  • Page 96 With a computer Interface USB port [Hi-Speed USB (USB 2.0)] Other requirements Mouse or equivalent pointing device ≥ Supplied CD-ROM is available for Windows only. ≥ Operation on an OS other than the one pre-installed is not guaranteed. ≥ Operation is not guaranteed on computers that are not PC/AT compatible. ≥...

  • Page 97: Installation

    Installation When installing the software, log on to your computer as the Administrator (or with a user name with equivalent authorization) or with the user name for a standard user account. (If you do not have authorization to do this, consult your manager.) ≥...

  • Page 98: Reading The Operating Instructions Of The Software Applications

    ≥ You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF operating instructions. Select [start] # [All Programs (Programs)] # [Panasonic] # [HD Writer 2.0E] # [Operating Instructions]. VQT1H62 Uninstalling software application Follow the steps below to uninstall any software applications that you no longer require.

  • Page 99: Connection And Recognition

    Connection and recognition Camera–Computer connection After the software applications are installed, this unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the software applications. ≥ Remove the supplied CD-ROM if it is inserted in the computer.

  • Page 100: To Disconnect Usb Cable Safely

    With a computer ≥ JPEG format still pictures ([IMGA0001.JPG] etc.) are stored in the [100CDPFP] folder. These can be opened with picture software that supports JPEG pictures. ≥ Up to 999 files can be recorded in the [100CDPFP] or other such folder. ≥...

  • Page 101: Verifying The Unit Is Correctly Recognized By The Computer

    Verifying the unit is correctly recognized by the computer Connect the unit to the computer with a USB cable, select [PC CONNECT] on the USB function selection screen and then follow the steps below. ≥ With some computers including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established.

  • Page 102: Using Hd Writer 2.0E For Sx/Sd

    This unit is automatically recognized by the computer. (On the computer) Select [start] # [All Programs (Programs)] # [Panasonic] # [HD Writer 2.0E] # [HD Writer]. ≥ The HD Writer 2.0E for SX/SD introductory screen is displayed. If [OK] is clicked, the software will start.
  • Page 103 ª Writing back to an SD card ≥ Insert an SD card in this unit and format the card. (l 75) (Use an SD card that can be used for motion picture recording. (l 25)) Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased.

  • Page 104: Formatting A Disc

    With a computer ≥ The scenes from the selected one to the last one are played back on the full screen. ≥ Right click on the screen and then select [Stop] to stop playback. ª Converting data that was copied to the hard disk of the computer to MPEG2 format ≥...
  • Page 105 ª Creating a DVD-Video disc You can create a disc (DVD-Video) that can be played back on devices that do not support the AVCHD format. ≥ The images are in conventional standard quality. ≥ Insert an unused DVD-RW or DVD-R in a drive for DVD writing on the computer.

  • Page 106: If Using Macintosh

    With a computer If using Macintosh ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some personal computers cannot be used. ≥ Apple, Mac OS is either registered trademarks or trademarks of Apple Inc. in the United States and/or other countries.

  • Page 107: Others

    Others Menus and Indications Menu list Recording menus ª [BASIC] [SCENE MODE] (l 59) [D.ZOOM] (l 49) [O.I.S.] (l 56) [GUIDE LINES] (l 56) [CLOCK SET] (l 39) ª [VIDEO] [REC MODE] (l 45) [FADE COLOR] (l 51) [WIND CUT] (l 57) [ZOOM MIC] (l 49) [MIC LEVEL] (l 57) [AGS] (l 42)

  • Page 108: Playback Menus

    Others Playback menus motion picture playback) ª [PLAY SETUP] [PLAY MODE] (l 66) [REPEAT PLAY] (l 67) [RESUME PLAY] (l 67) [SCENE PROTECT] (l 72) [GUIDE LINES] (l 56) ª [EDIT SCENE] [DIVIDE] (l 71) [DELETE] (l 70) ª [DISC COPY] [COPY ALL] (l 85) [COPY SELECT] (l 85) * This can be used when a DVD burner...

  • Page 109: Beep Sound

    Menus related to [ADVANCED] ª [REC LAMP] ≥ [OFF] ≥ [ON] The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording.

  • Page 110: Indications

    Others Indications ª Recording indications Motion picture recording 60min 1920 0h00m00s ＨＧ R30min PRE-REC 1/100 OPEN JAN 1 2008 12:34PM Still picture recording (when the PHOTO SHOT button is pressed halfway) 60min 1920 0h00m00s ＨＧ R30min 1/100 OPEN MEGA Ｍ Remaining battery power 60min Remaining battery time...
  • Page 111 ª Playback indications Motion picture playback Still picture playback Playback Pause Fast forward/rewind playback Last/first scene paused Skip playback Slow motion playback Frame-by-frame playback ;1/2; 0h00m00s Playback time Play mode All scenes Scenes recorded on the selected date Number of recording pixels for motion pictures 1920k1080 1920...

  • Page 112: Messages

    Others Messages CANNOT RECORD. NO DATA. CANNOT BE USED DUE TO INCOMPATIBLE DATA. CANNOT RECORD - INCOMPATIBLE CONTROL DATA. CHECK CARD. THIS CARD CANNOT RECORD IN VIDEO MODE. CARD LOCKED. NOW ACCESSING. PLEASE DO NOT REMOVE CARD. CARD FULL. CANNOT RECORD. THE NUMBER OF SCENES HAS EXCEEDED THE MAXIMUM LIMIT.

  • Page 113: About Recovery

    You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied AC adaptor. (l 30) If using a Panasonic battery compatible with this unit (l 28), eject the battery and then insert it again. If the message appears even after repeating this several times, this unit needs repair.

  • Page 114: Functions That Cannot Be Used Simultaneously

    Others When the remaining capacity of the battery is low: [CANNOT REPAIR CONTROL INFORMATION DUE TO LOW BATTERY POWER.] ≥ Use a sufficiently charged battery or the AC adaptor. ≥ Depending on the condition of the data, it may not be possible to completely repair the data. ≥...

  • Page 115: Troubleshooting

    Troubleshooting ª Unit operations Problem This unit cannot be turned on. This unit is turned off automatically. This unit does not stay on long enough. Battery runs down quickly. The minute display of the remaining battery power indication is not displayed correctly.
  • Page 116 Others Problem This unit cannot be operated though powered up. This unit does not operate normally. The remote control does not function. The screen has changed suddenly. A function indication such as the remaining time indication or the elapsed time indication is not shown.
  • Page 117 Problem Recorded still pictures are not clear. Sound is not played back from the built-in speaker of this unit. Although this unit is correctly connected to a TV, images cannot be seen. The images are squeezed horizontally. Scenes cannot be deleted.
  • Page 118 Others Problem If the SD card is inserted in another device, it is not recognized. The indication disappears. The screen is frozen. No operation can be performed. White round spots like soap bubbles appear on the recorded picture. “PUSH THE RESET SWITCH.”...
  • Page 119 ª When connected to another device Problem EZ Sync does not work. The power turns off automatically. ª With a computer Problem Even if connected by the USB cable, this unit is not recognized by the computer. When the USB cable is disconnected, an error message will appear on the computer.
  • Page 120 Others If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. * Just how smoothly the scenes will be played back depends on the playback unit.

  • Page 121: When Deleting Scenes

    ª When PRE-REC was used for recording 1 Normal recording 2 PRE-REC recording A The picture momentarily stops at the end of the last scene that was recorded normally before PRE-REC recording. ª When the recording mode was changed from HN/HE to HG or from HG to HN/HE A The picture momentarily stops where the scenes switch between HN/HE and HG modes.
  • Page 122 Others Example 2: When recording again after having deleted the last scene. 1 Scene to be deleted 2 A new scene is recorded here. A The image will be still for several seconds wherever a scene was deleted. B The images of consecutive scenes where they are no deletions are played back smoothly one after another.
  • Page 123 Others ª When editing scenes on a computer using a program such as HD Writer 2.0E for SX/SD Example 1: When scenes were selected using HD Writer 2.0E for SX/SD and output to the media If scenes were dragged and dropped from the scene display area A and output to the media, the images will be still for several seconds wherever one scene changes to the next.

  • Page 124: Cautions For Use

    Others Cautions for use About this unit The unit and the SD card become warm during use. This is not a malfunction. Keep the High Definition Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).

  • Page 125: About The Battery

    When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. About the battery The battery used in this unit is a rechargeable lithium-ion battery.

  • Page 126: About Condensation

    Others About the SD card ≥ The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a computer etc. ≥...

  • Page 127: Explanation Of Terms

    close to the ambient temperature, the fog disappears naturally. Explanation of terms Automatic white balance White balance adjustment recognizes the color of light and adjusts so the white color will become a purer white. The unit determines the hue of light that comes through the lens and white balance sensor, thereby judging the recording condition, and selects the closest hue setting.

  • Page 128: Auto Focus

    Others source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode. White balance The images recorded by the unit may become bluish or reddish under the influence of certain light sources. To avoid such phenomena, adjust the white balance.

  • Page 129: Specifications

    Specifications High Definition Video Camera Information for your safety Power source: Power consumption: Signal system Recording format Image sensor Lens Filter diameter Zoom Monitor Microphone Speaker White balance adjustment Standard illumination Minimum required illumination Video output level Component terminal output level HDMI terminal output level Audio output level (Line)
  • Page 130 Others Dimensions Mass (Weight) Mass (Weight) in operation Operating temperature Operating humidity Battery operation time Motion pictures Recording media Compression Recording mode and transfer rate Picture size Audio compression Still pictures Recording media Compression Picture size VQT1H62 65 mm (W)k67 mm (H)k135 mm (D) [2.6 q (W)k2.6 q (H)k5.3 q (D)] (excluding projecting parts) Approx.
  • Page 131 AC adaptor Information for your safety Power source: Power consumption: DC output: Dimensions Mass (Weight) Battery pack Information for your safety Maximum voltage: Nominal voltage: Rated capacitance: Specifications may change without prior notice. AC 110 V to 240 V, 50/60 Hz 19 W DC 9.3 V, 1.2 A (Unit operation) DC 8.4 V, 0.75 A (Battery charging)

  • Page 132: Optional Accessories

    Others Others Optional accessories Accessory No. VW-AD21PP-K VW-VBG130 *1*2 VW-VBG260 *1*2 VW-VBG6 VW-VH04 VW-T3714H VW-W3707H RP-SDR01GU1A RP-SDR512U1A RP-SDM04GU1K RP-SDM02GU1A RP-SDV08GU1K RP-SDV08GU1A (USA only) RP-SDV04GU1K RP-SDV02GU1A RP-SDV01GU1A VW-BN1 *1 Please refer to page 28, concerning the battery charging time and available recording time. *2 The battery pack holder kit VW-VH04 (optional) is necessary.

  • Page 133: Accessory Order Form (For Usa Customers)

    CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY ACCESSORY ORDER OFFICE In CANADA, please contact your local Panasonic dealer for more information on Accessories. Price Each Your State & Local Sales Tax Shipping &...

  • Page 134: Request For Service Notice (Usa Only)

    Request for Service Notice: Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Camera and Digital Service Center VQT1H62 • Please include your proof of purchase. (Failure to do so will delay your repair.) •...

  • Page 135: Limited Warranty (For Usa Customers)

    If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished...

  • Page 136: Customer Services Directory

    1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...

  • Page 137: Warranty (For Canadian Customers)

    5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.

  • Page 138: Index

    Others Others Index ∫ A A/V terminal ....20, 81, 82, 89 AC adaptor ....26, 30, 125 Aperture .
  • Page 139 Red eye reduction .....55 Remaining battery capacity indication ..29 Remaining number of still pictures ..47 Remaining time left for recording .

  • Page 140: Spanish Quick Use Guide/Guía Española Para El Uso Rápido

    Others Others Spanish Quick Use Guide/ Guía española para el uso rápido ª Carga de la batería Conecte el cable de CA al adaptador de CA y a la toma de CA. Instale la batería en el compartimiento alineando la marca y, a continuación, conéctela de forma segura.
  • Page 141 ª Insertar/extraer una tarjeta SD Ajuste el selector de modo en la posición OFF. Mientras empuja la palanca SD CARD/ BATTERY OPEN A, deslice la tapa de la tarjeta SD/batería para abrirla. Inserte/extraiga la tarjeta SD de la ranura de la tarjeta. ≥...
  • Page 142 Others ª Grabación de fotografías (Imágenes JPEG) Gire el selector de modo para seleccionar Abra la pantalla LCD. Pulse el botón PHOTO SHOT hasta la mitad para ajustar el enfoque. (Solo para enfoque automático) Pulse el botón PHOTO SHOT completamente para sacar la foto. VQT1H62 ª...
  • Page 143 ª Reproducción de fotografías (Imágenes JPEG) Gire el selector de modo para seleccionar Pulse el cursor hacia arriba y luego seleccione la ficha [ de fotografías). A Ficha de reproducción de fotografías Seleccione el archivo que desea reproducir. B Página anterior C Página siguiente D Indicación de número de archivo E Nombre carpeta/archivo...
  • Page 144 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3...

This manual is also suitable for:

Hdc-sd5Hdc sd5 - avchd 3ccd flash memory high definition camcorderHdc-sd5pp

Table of Contents