Messages - Panasonic HDC-SD5 Operating Instructions Manual

Others

Messages

CANNOT RECORD.
NO DATA.
CANNOT BE USED DUE TO
INCOMPATIBLE DATA.
CANNOT RECORD -
INCOMPATIBLE CONTROL
DATA.
CHECK CARD.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
CARD LOCKED.
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
CARD FULL.
CANNOT RECORD.
THE NUMBER OF SCENES
HAS EXCEEDED THE
MAXIMUM LIMIT.
CANNOT RECORD - DATE
CAPACITY IS FULL.
CANNOT DIVIDE. THE
NUMBER OF SCENES IS
FULL.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
THIS BATTERY CANNOT
BE USED.
114
VQT1H64
Data writing to the SD card has failed.
There are no motion pictures or still pictures recorded on the SD
card.
If this message appears although data is recorded on the SD card,
the condition of the card is probably not stable.
Turn off the power and then turn it on again.
The recording format is different so it cannot be used. Save the data
on the SD card to a computer, then use the SD card after formatting
it.
This card is not compatible or it cannot be recognised by the unit.
An 8 MB or 16 MB SD card on which motion pictures cannot be
recorded is inserted.
The write protection switch on the SD Card is set to LOCK. (l 22)
The data is being processed. Close the SD card/battery cover and
wait for a while.
The SD card is full so no further data can be recorded. Delete
unnecessary scenes/files or insert a new SD card. (l 30, 70, 73)
The maximum number of recordable scenes on 1 SD card has been
reached so recording is not possible. Delete unnecessary scenes or
insert a new SD card. (l 30, 70)
The number of scenes grouped together on a date has reached the
maximum number so recording is not possible. Delete unnecessary
scenes or insert a new SD card. (l 30, 70)
The SD card is full or the number of scenes has reached the
maximum number of recordable scenes so the scenes cannot be
divided. Delete unnecessary scenes. (l 70)
The internal temperature of this unit is high so it cannot be operated.
Turn off the power, wait until the temperature falls and then turn on
the power again.
Use a battery that is compatible with this unit. (l 25)
You are attempting to connect an AC adaptor not compatible with
this unit. Use the supplied AC adaptor. (l 27)
If using a Panasonic battery compatible with this unit (l 25), eject
the battery and then insert it again. If the message appears even
after repeating this several times, this unit needs repair. Detach the
power and consult the dealer who you purchased this unit from. Do
not attempt to repair it by yourself.