Guide Line Function; Wind Noise Reduction Function - Panasonic HDC-SD5 Operating Instructions Manual

Recording

Guide line function

This is for viewing the slope and the
balance of the image while recording
or playing back.
You can check if the image is level while
recording or playing back motion pictures and
still pictures. The function can also be used to
estimate the balance of the composition.
¬ Rotate the mode dial to select
rotate the mode dial to
select the [ ] (motion picture
playback) tab. (l 64)
Press the MENU button, then select
[BASIC] or [PLAY SETUP] #
[GUIDE LINES] # desired item and
press the cursor button.
A [HORIZONTAL]
B [GRID1]
C [GRID2]
56
VQT1H64
To cancel the guide line function
Press the MENU button, then select [BASIC] or
[PLAY SETUP] # [GUIDE LINES] # [OFF] and
press the cursor button.
≥ The guide lines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.

Wind noise reduction function

or
This is for reducing the wind noise
and then
coming into the microphone when
recording.
¬ Rotate the mode dial to select
Press the MENU button, then select
[VIDEO] # [WIND CUT] # [ON] and
press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO] #
[WIND CUT] # [OFF] and press the cursor
button.
≥ This function's default setting is [ON].
≥ The wind noise reduction depends on the wind
strength. (The stereo effect may be reduced if
this function is activated in strong winds.
However, the stereo effect is automatically
restored when then the wind weakens.)
.