Self-Timer Recording; Built-In Flash - Panasonic HDC-SD5 Operating Instructions Manual

High definition video camera
Hide thumbs Also See for HDC-SD5:
Table of Contents

Advertisement

Self-timer recording

You can record still pictures on an SD card using
the timer.
¬ Rotate the mode dial to select
1
Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2
Move the cursor button up to
select [Ø].
≥ Each time the cursor button is pressed up, the
indication changes by one setting in the
following order: [Ø
10
cancelled
:
Records after 10 seconds
Ø
10
Ø
:
Records after 2 seconds
2
3
Press the PHOTO SHOT button.
A still picture is recorded after the [Ø
display and the recording lamp flashes for the
time which has been set.
≥ After recording, the self-timer is cancelled.
≥ If you press the PHOTO SHOT button halfway
and then fully in auto focus mode, the subject
is focused when the button is pressed halfway.
≥ When you press the PHOTO SHOT button fully
in auto focus mode, the subject is focused just
before recording.
To stop the timer midway through
Press the MENU button. (The self-timer setting is
cancelled.)
.
] # [Ø
] # setting
2
] or [Ø
10
≥ The self-timer is cancelled if the power is
turned off or the mode dial is operated.
≥ The self-timer standby mode is cancelled when
you press the recording start/stop button to
start motion picture recording.
Even if you press the recording start/stop
button while the self-timer is counting down,
motion picture recording is not possible.
≥ Depending on the time taken to bring the
subject into focus, the recording may take
longer than set to start.
≥ Setting the self-timer to [Ø
prevent image shake when the PHOTO SHOT
button is pressed while using a tripod etc.

Built-in flash

Use the built-in flash in order to record still
pictures in dark places.
¬ Rotate the mode dial to select
1
Press the cursor button. Then
move the cursor button down to
display the icon shown in the
illustration.
2
Move the cursor button left to
select [ß].
]
2
≥ Each time the cursor button is pressed left, the
indication changes by one setting in the
following order: [FLASH ON] >
[FLASH AUTO] > [FLASH OFF]
≥ When the PHOTO SHOT button is pressed
halfway, the flash indicator will appear in the
bottom left corner of the screen.
[FLASH ON]:
[FLASH AUTO]:ßA
[FLASH OFF]:
Recording
] is a good way to
2
ß
.
53
VQT1H64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents