Image Stabilizer Function; Guide Line Function - Panasonic HDC-SD1PP Operating Instructions Manual

Image stabilizer function

This is for reducing image shakes
(jitter) during recording.
Reduces the image shaking (jitter) due to hand
movement when recording.
Rotate the mode dial to select
¬
Press the MENU button, then select
[BASIC] [O.I.S.]
#
the cursor button.
To cancel the image stabilizer function
Press the MENU button, then select [BASIC] #
[O.I.S.] # [OFF] and press the cursor button.
≥This function's default setting is [ON].
≥In still picture recording mode, pressing the
PHOTO SHOT button halfway increases the
effect of the image stabilizer function. (MEGA
optical image stabilizer)
≥In the following cases, the image stabilizer
function may not work effectively.
– When the digital zoom is used
– When the unit is shaken greatly
– When you record a moving subject while
tracking it
.
[ON] and press
#

Guide line function

This is for viewing the slope and the
balance of the image while recording
or playing back.
You can check if the image is level while
recording or playing back motion pictures and
still pictures. The function can also be used to
estimate the balance of the composition.
Rotate the mode dial to select
¬
rotate the mode dial to
select the (motion picture
playback) tab. (
l
Press the MENU button, then select
[BASIC] or [PLAY SETUP]
[GUIDE LINES]
#
press the cursor button.
A [HORIZONTAL]
B [GRID1]
C [GRID2]
Recording
or
and then
68)
#
desired item and
59
VQT1A24