Guide Line Function; Wind Noise Reduction Function - Panasonic HDC-SD1 Operating Instructions Manual

Guide line function

This is for viewing the slope and the
balance of the image while recording
or playing back.
You can check if the image is level while
recording or playing back motion pictures and
still pictures. The function can also be used to
estimate the balance of the composition.
¬
Rotate the mode dial to select
rotate the mode dial to
select the (motion picture
playback) tab.
Press the MENU button, then select
[BASIC] or [PLAY SETUP]
#
[GUIDE LINES]
press the cursor button.
A [HORIZONTAL]
B [GRID1]
C [GRID2]
or
and then
#
desired item and
To cancel the guide line function
Press the MENU button, then select [BASIC] or
[PLAY SETUP] # [GUIDE LINES] # [OFF] and
press the cursor button.
≥The guide lines do not appear on the images
actually recorded.

Wind noise reduction function

This is for reducing the wind noise
coming into the microphone when
recording.
¬ Rotate the mode dial to select
Press the MENU button, then select
#
[VIDEO] [WIND CUT]
press the cursor button.
To cancel the wind noise reduction
function
Press the MENU button, then select [VIDEO] #
[WIND CUT] # [OFF] and press the cursor
button.
≥This function's default setting is [ON].
≥The wind noise reduction depends on the wind
strength. (The surround effect may be reduced
if this function is activated in strong winds.
However, the surround effect is automatically
restored when then the wind weakens.)
≥The wind noise reduction function does not
work with an external microphone.
Recording
.
#
[ON] and
55
VQT1A34