Table of Contents
Advertisement
zz is the list of characters to be suppressed. (xx stands for the hex value for
an ASCII code, see
2.)
FC Disables suppress filter and clear all suppressed characters. Syntax = FC.
E4 Replaces up to 15 characters in the data string with user specified charac-
ters. Replacement continues until the E5 command is encountered. Syn-
tax = E4nnxx
characters to be replaced plus replacement characters; xx
ters to be replaced and xx
through zz
1
E5 Terminates character replacement. Syntax = E5.
FE Compare character in current cursor position to the character "xx." If char-
acters are equal, increment cursor. If characters are not equal, no format
match. Syntax = FExx (xx stands for the hex value for an ASCII code, see
ASCII Conversion Chart (Code Page 1252)
EC Check to make sure there is an ASCII number at the current cursor position.
If character is not numeric, format is aborted. Syntax = EC .
ED Check to make sure there is a non-numeric ASCII character at the current
cursor position. If character is numeric, format is aborted. Syntax = ED .
Data Format Editor
Enter Data Format
Clear One Data Format
Save
5 - 4
ASCII Conversion Chart (Code Page 1252)
xx
yy
yy
...zz
1
2
1
2
defines replacement characters, continuing
2
and zz
.
2
zz
where nn is the total count of both
1
2
on page A-2.)
defines charac-
1
* Default Data Format
Clear All Data Formats
Discard
3800g User's Guide
on page A-
Advertisement
Table of Contents
