Rs-232 Baud Rate - Hand Held Products HANDHELD 3800G User Manual

Automatic Direct Connect Mode: This selection can be used if you have an
IBM AT style terminal and the system is dropping characters. Default = Off
Automatic Direct
Connect Mode On

RS-232 Baud Rate

Baud Rate sends the data from the imager to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the imager.
Default = 115,200 .
1200
4800
19200
57,600
3800g User's Guide
300
* Automatic Direct Connect
Mode Off
600
2400
9600
38400
* 115,200
2 - 7