Attaching The Outer Slide Rail Assembly To The Rack - Compaq PROLIANT DL760 User Manual

Attaching the Outer Slide Rail Assembly
to the Rack
Attaching the slide rail assembly to the rack consists of the following steps:
I
Marking the server's rack position with the template
I
Inserting the cage nuts into the rack frame
I
Installing the outer slide rail assembly into the rack
Marking the Rack with the Template
Use the template provided with the kit to mark the rack for cage nut and
mounting bracket positions. Starting at the bottom of the rack or at the top of a
previously mounted component.
1. Place the template in the desired location on the front of the rack and
secure it in place with the rail covers. Make sure that you match the hole
pattern printed on the template with the actual holes on the rack's
vertical rails. Tap the rail covers sharply to snap the template into place.
Figure 2-9. Applying the template to the rack
Installing the Server in a Rack 2-19