Video; Redundant Hot-Plug Power Supplies; Redundant Hot-Plug Fan - Compaq PROLIANT DL760 User Manual

1-8 Compaq ProLiant DL760 Servers User Guide

Video

Redundant Hot-Plug Power Supplies

Redundant Hot-Plug Fan

The Compaq Integrated PCI Video Controller with 2 MB of RAM provides
maximum resolution of 1024 x 768 non-interlaced resolution. It supports:
I
16 to more than 256 colors, depending on graphics mode
I
SVGA, VGA, and EGA graphics resolution
I
The Compaq ProLiant DL760 server supports 1150/500W hot-plug
redundant power supplies.
WARNING: Hot-plug power supplies are not designed to be installed with AC
current connected to the power supply. To prevent personal injury or damage to
the equipment, be sure to disconnect the power supply from AC current prior to
its removal or installation.
I
Power supplies are load-balancing and have microcontroller monitoring
for advanced health and configuration management.
I
Supports up to two power supplies. See the Power Requirements section
of Chapter 2, "Installing the Server in a Rack," to determine power
supply requirements.
ProLiant DL760 servers include a 1+1 redundant hot-plug fan. If the primary
fan fails, the server generates a system alert and triggers the secondary fan to
take over automatically. This redundant hot-plug system fan protects the
various server components from overheating and possible system interruption.