Attaching The Slide Rail Assembly To The Rack; Marking The Rack With The Template - Compaq ProLiant 8500 Setup And Installation Manual

2-16 Compaq ProLiant 8500 Servers Setup and Installation Guide
Attaching the Slide Rail Assembly to the
Rack

Marking the Rack with the Template

Attaching the slide rail assembly to the rack consists of the following:
Marking the server's rack position with the template
Installing the slide rail assembly on the rack
Use the template provided with the kit to mark the rack for cage nut and
mounting bracket positions. Starting at the bottom of the rack or at the top of a
previously mounted component:
1. Place the template in the desired location on the front of the rack and
press four plastic retainer tabs into the rack holes. Make sure that you
match the hole pattern printed on the template with the actual holes on
the rack's vertical rails.
Figure 2-10. Applying the template to the rack
2. Use a pencil to mark the top two locations indicated on the template for
the cage nuts that will hold the captive thumbscrews on the rack mount
front panel.