Manually Selecting The Paper Size - Konica Minolta Di1610 User Manual

4

Manually Selecting the Paper Size

1
Position the original.
H "Loading Originals" on page 3-22
2
Press the [Paper] key until the tray
loaded with the desired paper is
selected.
Note
If paper is loaded into the
Bypass Tray, first remove it.
If Tray1 is selected, the paper
size and paper type must first be
specified. For details, refer to
"Selecting the "PAPER
SOURCE SETUP" Menu" on page 5-9.
3
Make the other necessary settings.
H "Specifying the Zoom Ratio" on page 4-9
H "Adjusting the Image Density" on page 4-11
4
Using the 10-Key Pad, enter the number of copies to be made, and
then press the [Start] key.
This will start the copy cycle.
4-4
Making Copies
4980P551DA
2
LT
Di1610/Di1610p