Specifying The Setting For "Tray1 Paper - Konica Minolta Di1610 User Manual

5

Specifying the Setting for "TRAY1 PAPER"

1
Select "TRAY1 PAPER".
H Refer to "Selecting the "PAPER SOURCE SETUP" Menu" on
page 5-9.
2
Press the [ ] and [ ] keys until the
type of paper loaded is selected.
3
Press the [Yes] key.
4
Press the [ ] and [ ] keys or press
the [▼] key to select the size of
paper that is loaded. If "CUSTOM"
is not selected, continue with step 8.
H If "CUSTOM" is selected,
perform steps 5 through 8.
Note
If "OHP" was selected in step 3,
the only paper sizes that can be
loaded are A4 L and Letter L.
Tip
Pressing the [ ] and [ ] keys moves "
size.
To return to the previous message, press the [No] key.
5-10
Ö
Ö
Ö
Ö
Ö
Ö
Using the Utility Mode
A4
A5 B5
" to select the paper
Di1610/Di1610p